Philips 42PFL9900/98 manual Sound, Hdmi connections, USB connection, If your problem is not solved

Page 46

2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 46

The picture position on screen is not correct

Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key on the remote control. Check the signal output of the device.

Sound

There is a picture but no sound

Verify the volume is not set to 0.

Verify the sound has not been muted with the ¬ key.

Verify if all cables are connected properly.

If no sound signal is detected, the TV automatically switches off the sound.

This is proper operation and does not indicate malfunction.

The sound is poor

Verify if the sound is set to Stereo.

Verify the Equalizer settings.

Select any of the Reset to standards settings in the Reset to standard menu. See section 5.3.2.

The sound comes from one speaker only

Verify if the Balance is not set to extreme left or right.

HDMI connections

Trouble with devices connected with HDMI

The HDMI - HDCP procedure might take a few seconds before the TV shows the picture from a device.

If the TV does not recognise the device and the screen shows no picture, try switching from one device to another and back again to restart the HDCP procedure.

If sound interruptions occur persistently, see the user manual of the device to verify the output settings. If that does not help, connect an additional audio cable.

If an HDMI-to-DVI adaptor is used, verify if an additional audio connection is in place to complete the DVI connection.

USB connection

The TV does not show the USB device content

Set your device (camera) to ‘Mass Storage Class’ compliant.

The USB device may need specific driver

software. Unfortunately this software can not be downloaded to your TV.

I can not see my files in the Multimedia menu.

Not all audio and picture files are supported. See section 8 Technical data.

Audio and picture files do not playback smoothly

The transfer performance of the USB device limits the transfer rate.

Personal computer

The PC display on my TV is not stable or is not synchronised

Verify if the correct resolution mode is selected on your PC. See section 8 Technical data.

If your problem is not solved

Switch your TV off and on again. If the problem is not solved, call the Customer Support Centre or consult our website

www.philips.com/support.

See the Customer Support Centre telephone numbers on the last page of this user manual.

Please, have the TV Model and Product Number ready before you call.

You can find these numbers on the packaging label or on the typelabel on the back and bottom of the TV.

)Warning

Never try to repair the TV yourself.

46

Troubleshooting

Image 46
Contents Table of contents Warranty Care of the screen SafetyRecycling EEC 2002/96/ECYour TV Side connectorsBack connectors Television overviewProduct highlights Getting startedPosition the TV Mounting the wall mount bracket Wall mountingUnmounting the TV stand 30kg Vesa compliant mounting Antenna cable Remote control batteries Connect the mains cordFirst time installation RNoteTo switch off Press B Power at the side of the TV Switch on or off StandbyUse your TV Watch TV Switch channelsAdjust volume Watch channels from a digital receiverSelect a Teletext Watch a DVDTip Change Ambilight mode TV standby with AmbilightRemote control overview Remote controlUse more of your TV Operate the selected device, a setup is required to HTSAutomatic search of all codes Enter the setup code directlyOperate DVD, Set-Top Box and Home Theater devices TV menu overview Keep the remote in the chosen mode permanentlyMenu Use of the menu Settings assistant Picture and Sound settingsQuick access menu Reset to standardsPicture settings ‡ Press q to switch on the Picture format menu Press navigation key up or down to select a setting Sound settingsThis section describes how to adjust all sound settings BalanceSelect pagenumber subpages AmbilightTeletext Dual screen teletextReveal Enlarge teletext pagesTeletext menu Cycle subpagesSelect a favourite list Create favourite channel listsSelect a channel from a favourite list Timers and locks To switch off the On timer, select Off in the On timer menuSubtitles ‡ Press Menu on the remote control and selectPress navigation key left to return to the Features menu Subtitling from TV channelsInsert a USB device Slideshow settingsView and play photos, MP3 Remove the USB device ç CautionThumbnails Music settingsListen to music Transfer of the downloaded software update to the TV Software updateUpdate assistant TV identificationPress B on the remote control Update is finished when the message‹The TV switches back on again. The update is done † Remove the USB memory device from the TVAutomatic installation Channel installationManual installation Fine tune a channel Uninstall or reinstall a channelRearrange stored channels Rename a channelChannel installation settings are not changed Factory settingsAutomatic channel management Sound output cinch connector for a Home Theatre System, etc Back connectorsSecond AV connector ConnectionsHdmi Highest quality About connectingYPbPr can handle HD TV signals Component Video HDMI-control if presentAn S-Video cable Display synchronised audio outConnect your devices DVD playerDVD Recorder and Home Theatre System DVD Recorder and DVD Home Theatre SystemUse a Hdmi cable and 2 antenna cables Satellite receiverHD Digital receiver / HD satellite receiver DVD-R, Home Theatre System and Digital receiverGame console Blu-ray Disc player Use a Hdmi cableCamcorder For supported PC monitor resolutions, see Technical data Personal ComputerNaming your devices Connections setupDigital Audio In if present Audio In L/RTechnical data JpegTV channels TroubleshootingTelevision and remote control PictureHdmi connections If your problem is not solvedSound USB connectionIndex Search Rename Reorder Reset to standards SafetyScreen cleaning Teletext pages Set code