[Scrambled Program OSD]
Show OSD on scrambled TV channel.
[Power settings]
The possible power settings are explained below.
The power on function allows the TV to enter a specific mode ([On], [Standby], or [Last status]) of operation when the mains power is activated (cold start):
[On]: The TV will always turn on (show startup channel) after the mains power is connected.
[Standby]: When set, the TV will always turn to standby (status as defined in Low power standby option) after the mains power is connected.
[Low power standby]
The Low power standby option defines the TV to enter a specific standby mode after pressing the On/Off button on the remote control.
[Fast]: The TV will quickly turn on (This mode will consume more power in
[Green]: The TV will turn on less fast. (This mode will consume less power in
[Smart power]
The power consumption for the Smart power mode is defined by the Smart Picture setting in the TV Setup part.
[Off]: The TV will start with the Standard Smart Picture setting, but the setting can be changed in the guest setup mode.
[On]: The TV will start with the default Smart Picture setting and Smart Picture setup and is not selectable in the guest setup.
[Auto Powerdown]
Enables or disables the use of the automatic switch off functionality. The TV will switch off if no RC action is noticed after 240 minutes:
[Off]: The TV will not switch off after 240 minutes
[On]: The TV will switch of after 240 minutes
25