Managing cables
Route your antenna cable and all other cables through the cable management tie at the back of the TV.The holder helps keep your cables tidy and easily manageable.
1 Attach the cable management tie as illustrated below. 55” / 46”
40”
2 Pass cables through the cable management tie to avoid tangles. 55” / 46”
40”
Connecting the AC power cord
Warning
•Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different.
1Locate the power connector at the back of the TV.The location of the power connector varies according to TV model.
2Insert the AC power cord fully into the power connector.
3Connect the AC power cord plug to the power outlet. Ensure that the cord is tightly secured at both ends.
55” / 46”
40”
Disconnect the TV from the power outlet
Caution
•Pull the AC power cord by the plug; do not pull on the AC power cord.
1 Unplug the AC power cord from the power outlet.
2 Unplug the AC power cord from the power connector at the back of the TV.