4 Setup
4.1 Picture and sound
Smart settings
If you select a Smart setting in the ADJUST menu, you can again change the settings of the selected Smart setting with the Picture and sound settings in Setup. The Smart setting remembers your changes.
Reset a Smart setting
To reset a Smart setting to its original values, select the Smart setting you want to reset in the ADJUST menu. Then press h > Setup > TV settings, select Reset, press OK and confirm.
Read more about using Smart picture and sound settings in Help
>Use your TV > Watch TV > Smart picture and sound settings.
Picture
In the Picture menu, you can adjust all picture settings individually.
To open the Picture settings, press h > Setup > TV settings > Picture.
• Contrast
Sets the contrast level of the picture.
• Brightness
Sets the brightness level of the picture.
• Colour
Sets the level of colour saturation.
• Hue
If NTSC is broadcast, hue compensates the colour variations.
• Sharpness
Sets the level of sharpness of fine detail.
• Noise reduction
Filters out and reduces the image noise in the picture.
• Tint
Sets the colours to Normal, Warm (reddish) or Cool (bluish). Select Custom to set up your own personal settings in the Custom menu.
• Custom tint
Use the slider bar to set the colour temperature of the picture.
• Perfect Pixel HD
Controls the advanced settings of the Perfect Pixel HD Engine .
—Perfect Natural Motion removes motion judder and reproduces smooth movement, especially in movies.
—LED 400 Hz Clear LCD gives a superior motion sharpness, better black level, high contrast with a
—Super resolution enables superior sharpness, especially on lines and contours in the picture.
—Perfect contrast sets the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture.
—Dynamic backlight sets the level at which power consumption can be reduced by dimming the brightness intensity of the screen. Choose for the best power consumption or for the picture with the best brightness intensity.
Setup / Picture and sound
—MPEG artefact reduction smooths the digital transitions in the picture.
—Colour enhancement makes the colours more vivid and improves the resolution of details in bright colours.
—Gamma is a
•PC mode
Sets the TV to the ideal
• Light sensor
Adjusts the picture and Ambilight settings automatically to the lighting conditions of the room.
• Picture format
Read Help > Use your TV > Watch TV > Picture format.
• Screen edges
Slightly enlarge the picture to hide distorted edges.
• Picture shift
Move the picture up / down or left / right with the cursor keys.
Sound
In the Sound menu, you can adjust all sound settings individually.
To open Sound settings, press h > Setup > TV settings > Sound.
• Bass
Sets the level of low tones in the sound.
• Treble
Sets the level of high tones in the sound.
• Surround
Sets the surround sound effect from internal speakers.
• Headphones volume
Sets the volume for the headphone connection of the TV.
• Auto volume levelling
Reduces sudden volume differences like at the beginning of adverts or when switching from one channel to another.
• Balance
Sets the balance of the left and right speakers to best fit your listening position.
Eco settings
Eco settings bundle the TV settings that help the environment.
While you are watching TV channels, press the Green key to open Eco settings. Active settings are marked with a ê. Press again to close.
Energy saving
This Smart picture setting sets the picture, together with Ambilight, in the most ideal energy conscious setting. To switch on, select Energy saving in Eco settings and press OK.
To switch off Energy saving, select another Smart picture setting.
Screen off
If you only listen to music, you can switch off the TV screen to save energy. Select Screen off and press OK. To switch the screen back on, press any key on the remote control.
Light sensor
The built
41
Downloaded From