Philips 46PFL5605/98 Use your TV, Switch your TV on/off or to standby, Watch connected devices

4 Use your TV Switch channels

This section helps you perform basic TV operations (see ‘Use more of your TV’ on page 10).

Switch your TV on/off or to standby

To switch on

If the standby indicator is off, press Power switch at the bottom of the TV.

If the standby indicator is red, press (Standby-On) on the remote control.

To switch to standby

Press	(Standby-On) on the remote
control.

»The standby indicator switches to red.

To switch off

Press the Power switch at the bottom of the TV.

»The standby indicator switches off.

Tip

Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

Press BACK A/CH on the remote control to return to the previously viewed channel.

Press CH +/- on the remote control or P/CH +/- on the side of the TV.

Press OK to use the channel matrix. Enter a channel number using the

Numeric buttons.

Note

When you use a favourite list, you can only select those channels in the list.

Watch connected devices

Use the source button

1Press SOURCE.

» The source list appears.

2Press or to select the connected device.

3Press OK to watch the connected device.

EN