Philips 55PFL4706 Connecting the TV to the internet using an Ethernet cable, Audio coaxial cable

Connecting the TV to the internet using an Ethernet cable	Connecting a digital home theater amplifier using a digital
	audio coaxial cable

LANWAN

1 2 3 4 5

hub or

broadband router

Ethernet cable

internet	LAN
telecommunications	Ethernet cable
equipment (modem, etc.)

Note

• Please purchase shielded Ethernet cables at your local store and use them when you

OUT

Note

DIGITAL AUDIO

IN

digital home theater amplifier

connect to network equipment.

• After connecting an Ethernet cable, set up necessary network settings. (For the

network setup, refer to ‘Network’ on page 29.)

• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid

damaging the unit.

• If your telecommunications equipment (modem, etc.) does not have broadband router

functions, connect a broadband router.

• If your telecommunications equipment (modem, etc.) has broadband router functions

but there is no vacant port, use a hub.

• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

• Do not connect your PC directly to the Ethernet port of this unit.

Connecting the TV to the internet using a wireless LAN

Wireless LAN Access Point(AP) (e.g. wireless router)

WAN

internet	LAN
network equipment
(modem, etc.)	Ethernet cable

Note

•After you made the wireless connection, set up necessary network settings. (For the network setup, refer to ‘Network’ on page 29.)

•Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)

•This unit does not support Ad-hoc mode.

•Other radio devices or obstacles may cause interference to the wireless network connection.

•Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast.

40EN