2440.2 gb
Care of the screen
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible. Their long time contact with the screen causes deformations and colour fading.
Warning concerning stationary images on the TV screen
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen.
Preparation
&Table stand instructions
How to mount the supplied stand, see the supplied Quick Start Guide.
Note: Other (not supplied) stands are optional accessories. Consult your dealer.
éFor ventilation, leave at least 5 cm free all around the TV.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
“Insert the aerial plug firmly into the aerial socket x at the bottom of the TV.
For best picture quality use the suppressor- aerial cable supplied.
‘Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of
(Remote control: Pull out the plastic insulation sheet from the battery, this will activate the remote control.
The battery supplied with the appliance does not
CR 2025 contain mercury or nickel
cadmium so as to protect
the environment. Please
do not discard your used
batteries, but use the recycling methods available (consult your distributor).
§To switch on the set, press the B key on the TV. An indicator comes on and the screen lights up. Go straight to the Quick Installation chapter, p. 5.
If the TV remains in standby mode (red indicator), press the
The indicator will flash when you use the remote control.
2