7Clone TV configuration data
You can copy the configuration data from a TV to a USB storage device or vice versa.This enables you to bypass the setup menu and configure multiple TVs by simply using the USB storage device.
This section describes how to clone the configuration data from a TV to a USB storage device or from a USB storage device to a TV.
Clone data using a USB storage device
1 | Press M on the setup remote control to display the setup menu. | |
2 | Press | to select SMARTCLONE > SOURCE. |
3 | Press | to select one of the following: |
• USB TO TV: To clone the data from a USB storage device to a TV.
• TV TO USB: To clone the data from a TV to a USB storage device.
| SMARTCLONE |
SOURCE | USB |
USB TO TV | > |
TV TO USB | > |
Clone data from an RF channel
1 | Press M on the setup remote control to display the setup menu. | |
2 | Press | to select SMARTCLONE > SOURCE > RF. |
3 | Press | to set the following: |
• CABLE TUNING: Select YES to access channel numbers
• RF CHANNEL NUMBER: Select an RF channel to retrieve the configuration data from.
• RF TO TV: To start the download of data from an RF channel.
SMARTCLONE |
| lish |
SOURCE | RF | Eng |
| ||
CABLE TUNING | YES |
|
RF CHANNEL NUMBER | 18 |
|
RF TO TV | > |
|
EN 9