Philips 22PFL4907 You must set Home in Location. p, Picture Settings assistant Start now, Tint

Picture

Before you begin:

You must set Home in Location. ➠ p. 38

Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode.

1Press MENU / EXIT and use ▲▼◄► to select Setup, then press OK.

2Use ▲▼ to select Picture, then press OK.

Picture	Settings assistant	Start now
Sound	Auto picture	Personal
Features	Backlight
Installation	Contrast
Software	Brightness
	Color
	Tint
	Sharpness

3Use ▲▼◄► to select the item you want to adjust, then press OK.

•The following picture settings can be configured. Depending on the format of the picture Source, some picture settings are not available.

Settings assistant	to guide you through the best picture setting
	to select the desired setting, then press OK
Auto picture	(Personal, Vivid, Sports, Standard, Movie, Game
	Internet video and Power saver)
	When you adjust the following settings, Personal will
	be set automatically.
	Cursor ◄	Cursor ►
Backlight	to reduce power	to set the backlight
	consumption	brighter
Contrast	to decrease contrast	to increase contrast
Brightness	to decrease brightness	to increase brightness
Color	to decrease color	to increase color intensity
	intensity
Tint	to add red	to add green
Sharpness	to soften	to sharpen

				30 English
	to select the desired setting, then press OK
* Advanced picture	(Color alignment, Noise reduction, Black stretch,
	Dynamic contrast, Gamma, MPEG artifact reduction,
	Color enhancement, Custom color management
	and Film mode)
	Automatic
	Super zoom
	4:3
Picture format
	Movie expand 14:9	Changing picture format ➠ p. 26
	Movie expand 16:9
	Wide screen
	Unscaled
	PC	to Turn Off image enhancement
		features which makes the TV to
Mode selection		act purely as a monitor
	HDTV	to enable image enhancement
		features to improve picture
		quality
Auto adjustment	to adjust the horizontal / vertical position, clock and
	phase of the PC screen automatically
	Cursor ◄		Cursor ►
Clock	to decrease setting value		to increase setting value
Phase
Horizontal shift	to move PC screen left		to move PC screen right
Vertical shift	to move PC screen down		to move PC screen up

Continued on next page.