•[Color] Adjusts color saturation.
•[Sharpness] Adjusts the level of sharpness in image details.
•[Noise reduction] Filters and reduces noise in an image.
•[Tint] Adjusts the color balance in an image.
•[Color temperature] Adjusts color temperature.
•[Dig.CrystalClear] Digitally adjusts picture quality to optimal contrast, color and sharpness.
•[Dynamic contrast] Automatically enhances contrast in an image. A [Medium] setting is recommended.
•[Dynamic backlight] Adjusts the brightness of the TV backlight to match lighting conditions.
•[MPEG artifact re.] Smooths out transitions on digital pictures. You can switch this feature on or off.
•[Color enhancement] Makes colors more vivid and improves the resolution of details in bright colors. You can switch this feature on or off.
•[PC mode] Adjusts the picture when a PC is connected to the TV via HDMI.
•[Picture format] Changes the picture format.
•[Horizontal shift] Adjusts the picture horizontally for
•[Vertical shift] Adjusts the picture vertically for
Change picture format
1Press 
FORMAT.
» A picture format bar appears.
2Press 
to select a picture format.
»The selected picture format is activated.
3Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be configured.
Note
•Depending on the format of the picture source, some picture settings are not available.
[Super zoom] (Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion.
[4:3] Shows the classic 4:3 format.
[Subtitle zoom] Displays 4:3 pictures over the full area of the screen, with
[Movie exp.14:9] (Not for HD and PC mode.) Scales 4:3 format to 14:9.
[Movie exp.16:9] (Not for HD and PC mode.) Scales 4:3 format to 16:9.
[Wide screen] Stretches the classic 4:3 format to 16:9.
[Unscaled] For PC mode and CVI 1920 x 1080 resolution only. Allows maximum sharpness. Some distortion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results.
10EN