Philips 26HFL4371D/10 Access decoder channel, Change TV preferences, Set decoder channel

Page 21

Update using OAD (On the Air software Download)

If Professional mode is [On], your TV automatically receives software updates in semi-standby mode without notice on screen.The TV restarts after the software update is complete.

Access decoder channel

You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV.The decoder or a descrambler must be connected to EXT1 (SCART).

E n g l i s h

Change TV preferences

1 Press MENU.

2 Press to select [Setup] > [Installation] > [Preferences].

3 Press OK or to enter [Preferences].

[Location] Optimises TV settings for your location - home or shop.

Note

If [Shop] mode is selected:

•• The [Smart picture] setting will be switched to [Vivid] automatically to display the brightest backlight on screen.

•• E-sticker is applicable to display the TV selling features on screen.

[Volume bar] Displays the volume bar when adjusting the volume.

[Channel info.] Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

[EasyLink] Enables one-touch play and one-touch standby between EasyLink compliant devices.

[E-sticker] For shop mode only. Sets the location of the e-sticker.

Set decoder channel

Map channels from a decoder or descrambler

1

Press MENU.

2

Press

to select [Setup] >

 

[Installation] > [Preferences] >

3

[Decoder].

Press OK or to enter [Decoder] menu

4

.

 

Press

to select [Channel] and press

 

OK or

to enter.

 

»» A list of analogue channels appears on

5

the screen.

Press

to select one channel to map

 

to the decoder/descrambler channel and

6

press OK to confirm.

Select [Status] and press OK or to

7

enter.

 

Press

to select [EXT 1] (SCART)

 

the connector used by the decoder/

8

descrambler.

Press OK.

9

Press EXIT to exit.

EN 19

Image 21
Contents Page 0844 800 Contents To use according to scientific evidence available today Koninklijke Philips Electronics N.V. All rights reservedStandard Risk of electric shock or fire SafetyDisposal of your old product and batteries Screen careSide controls and indicators Guest remote controlTV overview Mheg / Cancel Alarm OFFSubtitle SleepSwitch your TV on/off or to standby Switch channelsTo switch on Watch connected devices Adjust TV volumeUse Teletext Use the AV buttonChange picture and sound settings Access TV menusUse Settings assistant Remove devices from the home menuDVI Manually adjust Picture settingsChange picture format Adjust sound settingsSummary of picture formats Use Smart soundAccess the Teletext options menu Use advanced Teletext featuresExample, when switching channels Consistent audio volumeUse the Electronic Programme Guide Use TimersEnable subtitles on analogue TV channels Alarm On timerEnable subtitles on digital TV channels Use subtitlesUse the TV clock When viewing a slide show, press bOPTIONS Change slide show settingsView photos View a slide show of your photosListen to digital radio channels Update the TV softwareUpdate using OAD On the Air software Download Access decoder channelChange TV preferences Set decoder channelReset the TV to factory settings Press To select Setup Installation Factory settingsStart a TV Demo Automatically install channels Install channelsSelect your menu language Select your countryUpdate the channel list Manually install channelsSelect your system Search and store new TV channelsReorder channels Rename channelsTest digital reception Fine-tune analogue channelsBenefits of Professional mode IntroductionScreen information can be suppressed Switch on the TV and select a TV channel 9, 7, 5, 3+¬MUTE on Guest remote controlExit to exit Professional mode menu without saving Professional mode options Software / Channels / Both / Off PBS mode Enables / disables the Professional mode PBS settingsLast status is enabled Off The TV operates as a normal consumer TVPower on TV turns on from standby or offSet ID Welcome message RC lock Disables the operation of the Guest remote controlClock setup On The TV speaker is enabled TV speaker enableDefault main speaker volume Selects Hospitality in the Application MenuAll non-PayTV channels are listed in R0 Smart RCBack connector for 22 inch Connect devicesPC in VGA and Audio Audio and video input from a computer EXT 1 Cvbs and RGB Signal input from an antenna, cable or satelliteTV Antenna Spdif OUTBack connector for 26 inch TV and larger Slot for a Conditional Access Module CAM Side connectorCommon Interface Audio L/RVideo Connect a computerComposite video input from analogue devices such as VCRs USBAccess CAM services Use a Conditional Access ModuleInsert and activate a CAM MenuUse Philips EasyLink Enable or disable EasyLinkUse a Kensington lock Use one-touch playProduct information General TV issues TroubleshootingTV channel issues Picture issuesHdmi connection issues Sound issuesComputer connection issues Contact usIndex AlarmDemo CAMPower Picture format View photos Picture settingsSettings Remote control PhotoPage Page Koninklijke Philips Electronics N.V. All rights reserved
Related manuals
Manual 50 pages 46.4 Kb Manual 50 pages 47.27 Kb

22HFL3331D/10, 22HFL4371D/10, 26HFL4371D/10, 26HFL3331D/10, 32HFL4351D/10 specifications

The Philips 32HFL4351D/10, 26HFL3331D/10, 26HFL4371D/10, 22HFL4371D/10, and 22HFL3331D/10 represent a series of innovative hospitality TVs that prioritize guest satisfaction and operational efficiency. Designed specifically for the hospitality industry, these models integrate cutting-edge technology with user-friendly features.

At the heart of these Philips models is the SmartTV platform, enabling seamless access to a wide array of multimedia content. Guests can easily connect their devices for streaming, mirroring, or playing their favorite shows, enhancing their overall experience. The integration of an intuitive user interface allows both guests and hotel staff to navigate the TV's features with ease.

Picture quality is another standout characteristic of the Philips hospitality TVs. Equipped with advanced LED technology, these displays provide vibrant colors and sharp images, ensuring that every viewing experience is visually engaging. The Full HD resolution elevates the standard of entertainment, making it ideal for in-room services and promotional content.

Sound is an essential aspect of the viewing experience, and Philips addresses this with enhanced audio technology. The inclusion of powerful speakers ensures that dialogues are clear and that guests can fully immerse themselves in their chosen programs. Whether it's a movie night or an informational channel, the audio experience complements the visual quality.

Flexibility is key in hospitality environments, and these Philips models offer multiple connectivity options. With HDMI, USB, and AV inputs, guests have the freedom to connect their devices effortlessly. Moreover, the built-in SmartPlug feature provides energy-efficient operation and can be controlled remotely by hotel management, contributing to sustainability efforts.

One of the most significant advantages of the Philips hospitality range is their ability to deliver customized content. Hotels can easily tailor in-room entertainment systems to showcase promotional material, amenities, or local attractions, enhancing guest engagement and satisfaction.

Lastly, the robust build quality of these TVs ensures longevity, reducing maintenance costs and minimizing downtime. With a sleek design that complements various room aesthetics, they add a touch of modern elegance to any hospitality setting.

In summary, the Philips 32HFL4351D/10, 26HFL3331D/10, 26HFL4371D/10, 22HFL4371D/10, and 22HFL3331D/10 combine picture-perfect technology, superior audio, flexible connectivity, and customizable content solutions, making them an excellent choice for any hotel looking to elevate the guest experience.