Philips 22PFL5614/60 Switch your TV on/off or to standby, Switch channels, To switch on

Page 10

4Use your product

This section helps you perform basic operations (see ‘Use more of your product’ on page 10).

Switch your TV on/off or to standby

To switch on

•If the standby indicator is off, press POWER at the side of the TV.

•If the standby indicator is red, press

(Standby-On) on the remote control. To switch to standby

•Press (Standby-On) on the remote

control.

» The standby indicator switches to red.

To switch off

•Press POWER at the side of the TV. » The standby indicator switches off.

Tip

•Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

Note

•If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- or SOURCE at the side of the TV.

Switch channels

•Press P +/- on the remote control or P/CH +/- on the side of the TV.

•Enter a channel number using the Numeric buttons.

•Use the channel grid (see ‘Switch channels with the channel grid’ on page 8).

Note

•When you use a favourite list, you can only select those channels in the list.

Switch channels with the channel grid

The channel grid allows you to view all available channels in a grid format.

8EN

Image 10

Contents RU Руководство пользователя 0844 800 Contents Koninklijke Philips Electronics N.V. All rights reserved English Safety Risk of electric shock or ﬁreScreen care Have full access to the power cord at all timesDisposal of your old product and batteries Remote control Side controls and indicatorsTV overview AD Audio Descriptor For RF Digital TV only Switch channels with the channel grid Switch your TV on/off or to standbySwitch channels To switch onUse teletext Adjust TV volumeWatch connected devices Use the source buttonUse more of your product Access TV menusChange picture and sound settings Remove devices from the home menuChange picture format Manually adjust picture settingsFollowing picture settings can be conﬁgured Summary of picture formatsUse smart sound Adjust sound settingsAuto formatNot for HDMI, YPbPr EXT2/ EXT3 or PC mode 43Shows the classic 43 formatCreate and use lists of favourite channels Use advanced teletext featuresAccess the teletext options menu Select teletext subpagesAdd a channel to a favourite list Select a favourite listView all channels Remove a channel from a favourite listAutomatically switch the TV on on timer Use timersAutomatically switch the TV to standby sleeptimer Use TV lockUse the TV clock Use SceneaWatch TV in dual view Use sleeptimer with Scenea wallpaperUse Eco mode with Scenea wallpaper Personalize the Scenea pictureView photos Change slide show settingsWhen viewing a slide show, press View a slide show of your photosUpdate the TV software Change TV preferencesStart a TV demo Access decoder channelReset the TV to factory settings Set decoder channelInstall Channels Install channelsAutomatically install channels Select Start and press OK to re-install channelsSelect your system Manually install channelsSearch and store new TV channels Fine-tune analogue channelsRename channels Rearrange channelsSkip channels Connect devices Back connectors for 19-22 inch TVPC in VGA and Audio Audio and video input from a computer EXT 1 RGB and Cvbs Back connectors for 26 inch and larger TVTV Antenna Signal input from an antenna, cable or satellite EXT 2 Y Pb Pr and Audio L/RVGA Side connectors USB Data input from USB storage devicesDVI-HDMI cable Connect a computerHdmi cable and HDMI-DVI adaptor Use a Kensington lock Enable or disable EasyLinkUse Philips EasyLink Use one-touch playProduct information TV screen Required Size inches Pitch mm 75 x 100 x 200 x 400 xTV channel issues TroubleshootingGeneral TV issues Picture issuesComputer connection issues Sound issuesHdmi connection issues Contact usResolution Dual view IndexVolume Adjust Wallpaper Listen to music View photos Video format36 EN English Q41G4201813 5C