Philips 226V3L user manual Power Management Definition

Page 22

5. Power Management

5. Power Management

If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected,

the monitor will 'wake up' automatically.The following table shows the power consumption and signaling of this automatic power saving feature:

226V3LA:

Power Management Definition

	VESA	Video	H-sync	V-sync	Power Used	LED Color
	Mode	Video	H-sync	V-sync	Power Used	LED Color
	Mode

	Active	ON	Yes	Yes	22.1 W (typ.)	White

	Sleep	OFF	No	No	< 0.5W (typ.)	White
	(Standby)	OFF	No	No	< 0.5W (typ.)	(blink)
	(Standby)					(blink)

	Switch Off	OFF	-	-	< 0.5W (typ.)	OFF

226V3L:

Power Management Definition

	VESA	Video	H-sync	V-sync	Power Used	LED Color
	Mode	Video	H-sync	V-sync	Power Used	LED Color
	Mode

	Active	ON	Yes	Yes	22.8 W (typ.)	White

	Sleep	OFF	No	No	< 0.5W (typ.)	White
	(Standby)	OFF	No	No	< 0.5W (typ.)	(blink)
	(Standby)					(blink)

	Switch Off	OFF	-	-	< 0.5W (typ.)	OFF

The following setup is used to measure power consumption on this monitor.

Native resolution: 1920 x 1080

Contrast: 50%

Brightness: 250 nits

Color temperature: 6500k with full white pattern

Note

This data is subject to change without notice.

20

Image 22

Contents Troubleshooting & FAQs Table of Contents Maintenance Safety precautions and mainte- nanceOperation Notational Descriptions Temperature 0-40C 32-95FService Humidity 20-80% RHDisposal of product and packing material Waste Electrical and Electronic EquipmentPackage contents Setting up the monitorInstallation Install base standConnecting to your PC Operating the monitorModel 226V3LA OSD Menu Model 226V3LPhysical Function Tilt Resolution notificationRemove Base Stand and Base Remove the Base StandRemove 4 screws and then remove the base from the monitor SmartContrast Image OptimizationPhilips SmartControl Lite Start with Standard pane Adjust menu Color menu Image Optimization At startup will not load when this box is unchecked Disabled Technical Support displays the tech support Tune Display Opens the SmartControl Lite control panelExit Close SmartControl Lite Task Tray Menu Disabled Technical Specifications 30,000hrs Environmental Power On Mode Typ., 22.8 W max Energy Consumption226V3L Packaging 100% recyclableSelective models, UL/cUL, BSMI, ISO9241-307,C-Tick Compliance and standards Regulatory ApprovalsCabinet Color Black Finish Glossy/Texture Maximum Resolution Resolution & Preset Modes1920 x 1080 @ 60 Hz analog input Power Management Power Management DefinitionBrand owner offers take-back options Regulatory InformationThis display is designed for both you and the planet Only for selective modelsCE Declaration of Conformity Epeat Electronic Product EnvironmentalBenefits of Epeat This product is in conformity with the following standardsDeclaration of Conformity for Products Marked with FCC Logo Reorient or relocate the receiving antennaCet équipement a été testé et déclaré Regulatory Infomation Paikka/Ilmankierto Placering/VentilationPlassering/Ventilasjon China RoHS Pixels and Sub pixels Customer care and warrantPhilips’ Flat Panel Monitors Pixel Defect Policy Types of Pixel DefectsAdjacent dark subpixels Total bright dot defects of all typesDark subpixel Total black dot defects of all typesCustomer Care & Warranty Topaz-Service Company +38 044 245 73 Russia Bulgaria LAN ServiceLithuania UAB Servicenet BelarusContact Information for Apmea region AL Shahd Computer L.L.CTroubleshooting Make sure the computer is turned onQ2 What is the recommended refresh rate for LCD monitor? General FAQsPower on light is too strong and is disturbing Image appears blurred, indistinct or too darkQ6 Is the LCD screen resistant to scratches? Q4 How do I adjust the resolution?Q7 How should I clean the LCD surface? Q10 Are Philips LCD monitors Plug-and- Play?Troubleshooting & FAQs Koninklijke Philips Electronics N.V. All rights reserved