Remote control keys
Screen information / permanent no.
To display / clear the program number, name (if it exists), time, audio mode and time remaining for the sleep feature. Press the key for 5 seconds to activate permanent display of the number.This key is also used to exit from the menu.
Surround Sound (only available on certain versions). To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects. In mono, a stereo spatial effect is simulated.
VCR key *
Menu
To call up or exit the menus.
Cursor / Format These 4 keys are used to navigate through the menus.The îÏ keys are used to enlarge or compress the picture vertically.
Volume
To adjust the sound level
Mute
To mute or restore the sound.
Number keys Direct access to the programmes.
For a 2 digit program, enter the 2nd digit before the dash disappears.
Selection of EXT socket
Press several times to select
EXT1, EXT2, S-VHS and AV.
*“Dolby” and the
Radio / TV mode
To switch the TV set to radio or TV mode (for versions equipped with radio).
Standby
Lets you place the TV set on standby.To turn on the TV, press P @ @, b, 0 to 9 (or Â).
Teletext keys (p. 8), VCR keys (p.11) and list of radio stations ı (p. 5)
Sleep
To select an automatic standby after a preset time (from 0 to 240 minutes).
Format
To enlarge or compress the picture vertically
Pre-set image
Used to access a series of stored settings: Rich, Natural, Soft, Multimedia and return to Personal.
Teletext (p. 8)
Program selection
To access the next or previous programme.The number, (name) and sound mode are displayed for a few moments.
For some programs, the title of the program will be displayed at the bottom of the screen.
Teletext keys (p.8)
or VCR keys *
Sound mode (only available on stereo versions)
Used to force programmes in Stereo to Mono or, for bilingual programs, to choose between Dual I or Dual II. For TV sets equipped for Nicam reception, depending on the programmes, you can force the Stereo Nicam sound to Mono or select between Nicam Dual I, Nicam Dual II and Mono.
The Mono indication is red when in forced position.
*VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access the VCR functions: b % ∫ H îÏ È¬ P @# · ¢ Ê Æ 09
The remote control is compatible with all VCRs using the RC5 standard.
3