dbx Pro 480 user manual Redundancy Enable, Cue AFL

Page 65

 

 

™

Section 6

Utilities

DriveRack

 

 

•Use the PARAMETER 3 knob to select the desired microphone input. Mic input options include: Ch3, Ch4 and Ch3 and 4 simultaneously. Warming - RTA will not function proper- ly when using a microphone unless the option has been set appropriately.

6.15Redundancy Enable

The DriveRack™ units provide the user with the redundancy feature. This feature allows the selected master unit to retain all programming information of all unit used in a DriveRack™ net- work. This simply means that in the unfortunate event that one of the units goes out of ser- vice, a replacement unit can be added into the network and the information from the previous unit will be added via the master unit. For more information about Redundancy, please refer to section 7.4. To enable this feature, use the following procedure.

•Enter the “Utility” menu by pressing the UTILITY button once.

•Press the NEXT PG or PREV PG button until page 11 is reached.

•Use the PARAMETER 1 knob to set the Redundancy feature to On. The display will appear something like this:

6.16Cue AFL

The DriveRack™ units are capable of responding to Cue AFL MIDI commands from mixing con- soles including: Soundcraft™ SM20 and Series 5, Allen & Heath™ ML5000 and Midas™ Heritage To enable this feature, use the following procedure.

•Enter the “Utility” menu by pressing the UTILITY button once.

•Press the NEXT PG or PREV PG button until page 11 is reached.

•Use the PARAMETER 2 knob to set the Cue AFL feature to On. The display will appear something like this:

• Note - To use the CUE AFL function, the UART mode must be set to: MIDI.

®

56

DriveRack™ User Manual

 

 

Page 64 Page 66
Image 65
Page 64 Page 66
Contents 480 Important Safety Instructions Declaration Conformity DriveRack Table of ContentsDriveRack Intro Defining the DriveRack System DriveRack featuresIntroductionDriveRack DriveRackIntroduction 480R DriveRack featuresWarranty Service Contact InfoIntroduction SectionSection Rear Panel Connections Getting StartedInputs Front PanelLCD Display Function ButtonsInput Meters Power SwitchThreshold Meters Output MetersGround Lift Switch Outputs 1-8 Euroblock ConnectorsProgram Up and Down Program DisplayPC LED Remote LEDRS485 Control Thru Bus DB-9 connector type Program Up and Down Functions FX Button Array Overview Editing FunctionsBasic Navigation Modes DriveRack Parameter Knob Encoders Coarse/Fine Operation Parameter Knobs Horizontal-Vertical Navigation ModeNavigating the EQ Sections DriveRackNavigating the Xover Navigating the RTA Navigating the Delay Navigating the Dynamics Section Navigating the Other Section Navigating the Utility Section Configuration Program Definition Configuring the DriveRackNavigating Factory Programs Selecting ProgramsNavigation Modes Saving Factory Programs Changes Editing Factory ProgramsDriveRack Input Routing Creating a User ConfigurationPre Crossover EQ Delay SectionNotch Filter CrossoverLinking Modules Driver Alignment DelayOutput Routing and Phase Compensation Selecting and Moving Crossovers Saving Configuration Changes Detailed Pre-Crossover EQ Detailed ParametersInput Routing Zizz -6dB to 6dB Boom -6dB to 6dBSHOW/HOUSE 31 Band Graphic EQ S or H EQ On/Off Parametric EQ P EQ On/OffSlope 1 3-12dB/Octave Band 1 Frequency 20 to 20kHz Low ShelfLevel 1 -12 to 12 dB Band 2-8 Frequency 20 to 20kNotch Filters N Pre Crossover Delay DLYFilter Type 1 Wire, Lowpass, Highpass and Bandpass Filter Type Wire, Lowpass, Highpass and BandpassFilter Type 2 Wire, Lowpass, Highpass and Bandpass Lowpass 20Hz to 20kHzLow Slope 2 6-24dB/Octave Highpass 2 20Hz to 20kHzHigh Slope 2 6-24dB/Octave Low Fc 20Hz to 20kHzLow Fc 2 20Hz to 20kHz High Slope 1 6-24dB/Octave BW, Bessel 12-48dB/Octave L-RCenter Fc 2 20Hz to 20kHz High Fc 2 20Hz to 20kHzPost-CROSSOVER PEQ EQ Compressor/Limiter DYN Threshold -40 to +20dBu Speaker Alignment Delay DLYRatio 1.0 to Inf1 Gain -20 to +20 dBOutput Routing Phase Off, 0 toLevel/Shift On/Off Level Inf, -9.5 to 20.0dBProgram Saving Program Changes Storing ChangesDriveRack Saving Configuration Changes Utilities Security Levels UtilitiesNetwork ID Security Passwords Entering Security Password Program List Program Change Mode PC Comm Mode Contrast AdjustmentMidi Channels Power Up Mutes On/SavedMidi Program Dumps Program DumpsSysex Dump Setup Sysex IDMic Pre Set up Cue AFL Redundancy EnableFunctions Network Overview Network FunctionsConnectors Recommended Cable SpecificationsNetwork Connections Specs Cable LengthsBackbone Connections Network Connections ApplicationsConnection to the 480R Connection to the GUI Interface Termination Master/Slave Assignments Setting Identification NumbersControlling Remote Units Master/Slave Assignments cont’dDriveRack Replacing Units RedundancyNetwork Trouble Shooting System Requirements PC GUI InstallationBasic Venue View DriveRack DriveRack 480R Rear Panel Connections 480R 480R Remote ControllerFront Panel 480R SectionRear Panel Connections 480P Front Panel 480P Using the RTA Controlling Slave Devices Hot Key AssignmentsDriveRack Guide 4-Way Front of House Application GuideHardware SoftwareDriveRack C-R + Sub + Rear BiAmp & In-Ear Dedicated FOH Crossover DriveRackStand Alone Monitor EQ DriveRackAppendix Sysex Procedures Sysex Procedure and DataMidi SysEx Sysex Message End byteProcedure Sysex Setup Dump SampleReceive One Program 42h Receive Bulk Dump 48hProgram Bank and Program Number Program Dump VersionProgram Transmit Count...Lo Bytes, Hi Bytes Sysex EndPower Up Quick Key Options Factory ResetToggle RS-232/MIDI Flash DownloadsDriveRackAppendix a SpecificationsSpecifications 481 DriveRack Per input channel not to exceed 10 for all input channels Specifications 482 DriveRack Specifications 480R Remote Controller DriveRack DriveRack Crossover Diagrams101 3X3 1-band 103 4X8 2-band Gain Level Jumpers Input and Output Diagrams Pinking a Room Wire Diagrams Harman International Company

480 specifications

The dbx Pro 480 is a professional-grade dynamics processor renowned for its versatility and exceptional performance in various audio applications. Designed for both live sound and studio environments, the dbx Pro 480 stands out as an essential tool for sound engineers and musicians alike.

One of the main features of the dbx Pro 480 is its dual-channel operation, which allows users to process two audio signals simultaneously. This functionality makes it particularly advantageous for stereo mixes, providing the ability to manage dynamics across left and right channels cohesively. The unit employs patented dbx OverEasy compression technology. This unique approach to compression allows for smooth transitions between compression and limiting, preventing abrupt changes in audio levels that can disrupt the listening experience. The result is a more musical sound, making it ideal for vocals, instruments, and other dynamic sources.

Additionally, the dbx Pro 480 boasts comprehensive control options, including adjustable ratio, threshold, attack, and release parameters. This level of control enables users to tailor the dynamics processing to fit specific audio material, whether subtle shaping or more aggressive control is required. The inclusion of a high-pass filter on the sidechain input further enhances its versatility, allowing for frequency-dependent dynamics processing that can be particularly useful in managing low-end rumble or controlling sibilance in vocals.

Another notable characteristic of the dbx Pro 480 is its robust build quality, designed to withstand the rigors of both studio and live environments. The device features a rugged metal chassis that protects its internal components while providing reliable performance under various conditions. Additionally, high-quality XLR inputs and outputs ensure that audio signals remain clean and free of interference.

In terms of connectivity, the dbx Pro 480 is equipped with balanced connections to minimize noise and signal degradation, making it suitable for professional setups. Its intuitive front-panel interface includes LED metering for easy monitoring of input and output levels, facilitating prompt adjustments on the fly.

In conclusion, the dbx Pro 480 is a powerful dynamics processor that blends advanced technology with user-friendly features. Its dual-channel processing, unique compression algorithms, and robust build quality make it a top choice for audio professionals seeking to enhance their sound with precision and control. Whether in a recording studio or a live performance setting, the dbx Pro 480 continues to be an invaluable asset in the audio processing landscape.
Top Page Image Contents