No Power, No Picture | Philips 23PF5320 instruction

No Power

"Check the TV power cord. Unplug'[he TV, wait l0 seconds, then reinsert the plug into the outlet and

push the POWER button again.

,Check that the outlet is not on a walt switch.

,Be sure the fuse is not btown on the AC power strip, if one is being used

No Picture

Check antenna/cable connections. Are they properly secured to the TV's ANT75Q plug_

,Check the TUNER NODE control for the correct tuner setting.

,Try running the Auto Prograrn feature to find all _vaitable channels.

,Press the AV button on the remote to make sure the correct signal source is selected,

,If using an accessory device, be sure that it is functioning properly.

,If in PC PIode, a video signal MUST BE present or the TV wilt turn off

No Sound

. Check the VOLUME buttons.

. Check the MUTE button on the rernote control.

. If you're attempting to hook up auxiliary

equipment, check the audio jack connections.

No AV Signal

,Check whether AV and S-Video sockets connected simultaneously. If they are, disconnect the S-Video socket. AV signal automatically overrides the S-Video signal if both sockets are connected simultaneously.

SoVHS Color Becomes Faint

Unplug socket for S-Video connection. Reconnect the S-Video socket of the TV carefully to the VCR socket.

TV Onmy Produces MONO Sound

. Ifusinga cablebox with RF only type connections,

the signal corning from the cable box will be

produced in MONO only.

Check Sound control setting. Change setting to

Stereo.

Remote Does Not Work

Check the batteries. Ptace lithium ceil in the

remote. Be sure the (+) and (-) ends of the batteries

line up as marked inside the battery compartment.

Ctean the remote control and the rernote contro! sensor window on the TV.

. Check the TV power cord. Unplug the TV, wait l0

seconds,then reinsert the plug into the outlet and

push the POWER button again.

Be sure the fuse [s not btown on the AC power

strip, if one is being used.

Check to be sure the TV outlet is not on a wall switch.

Be sure that the remote is in the correct operating mode.

Be sure the remote is pointed at the Remote Sensor Window on the TV. See page 2. of the Quick Use OuideFor details.

TV Displays Wrong Channel or No Channels

Above 13

. Repeat channel selection.

. Add the desired channel numbers (using the

CHANNEL EDIT control) into the TV's memory.

. Check to be sure the TUNER MODES are set to

the CABLE option and run the Auto Program feature to find all available channels

Downloaded From TV-Manual.com Manuals