Clarion MCD360 manual Way System Application Notes

Page 10

2-Way System Application Notes

After all the wiring connections are made and before the system is turned on for the first time, you need to make some basic adjustments. It is important that the High-Pass and Low-Pass Frequency Controls are set correctly before turning on the system for the first time.

Setting the Crossover Frequency Controls

1.Set the crossover frequency controls to the frequency recommended by the speaker manufacturer. The following are some guidelines if this information is not available:

Most 6” speakers will operate down to 80 - 100Hz.

Most 5” or 4” speakers will operate down to 100 - 150Hz.

Most 3” speakers will not operate below 300Hz.

Most subwoofers have decreased sound quality when operated above 150Hz.

Depending upon the size of the front and rear speakers and the type of subwoofer system, fine tuning these adjustments may be required after the initial system set-up. Study the system design pages of this manual to determine the proper settings for these controls. Speakers are easily damaged if they are crossed over at a frequency below their usable range.

2.When making the high frequency adjustments, adjust the Low-Pass frequency control and the low frequency amplifier gain. Usually, the Low- Pass frequency should be set the same as the High-Pass frequency.

NOTE: An exception will be when the front/rearspeakeris too small to play down to a very low frequency and the subwoofersounds distorted trying to “play up” to meet the front/rearspeaker. This may require a gap ordifference between the high and low settings. Although not ideal, this is sometimes necessary to make the system work as well as possible.

Setting the Front Output Level

Before setting front level controls, disconnect both the rear output and the subwoofer output and follow the directions below.

1.Turn the output control level to the minimum setting.

2.Turn the amplifier gain controls to the minimum setting.

3.Turn the source unit on and increase the volume until distortion is heard, then reduce volume to just below this point.

NOTE: This is the maximum usable musical signal forthis source unit. turning the volume beyond this point will increase noise and distortion without an increase in musical signal. If you can increase the source unit volume to maximum without audible disortion, raise the output level controls slightly and begin again.

4.With the amplifier gains still at minimum and the source unit set at maximum volume without distortion, raise the front output level control until distortion is heard, then reduce gain to just below this point. This is the maximum output level for this system. For best performance do not increase beyond this point.

10

Image 10
Contents Page Introduction About the Manual and WarrantyTable of Contents DescriptionINPUT/OUTPUT Connections and Audio Controls Page Mounting Precautions Wiring Precautions Electrical connections for the MCD-360 Way System with Front and Rear Output ApplicationsPage Way System Application Notes Setting the Rear Output Level Way System Setting the Front and Rear Output Levels Troubleshooting Product Specs MCD360-10 Rev.1 02/00

MCD360 specifications

The Clarion MCD360 is an innovative car audio system that embodies cutting-edge technology and superior sound quality, designed for audiophiles and everyday drivers alike. This model stands out in Clarion's lineup due to its exceptional versatility and advanced features that enhance the in-car listening experience.

One of the most significant characteristics of the MCD360 is its robust power output. It delivers a remarkable sound performance with a built-in amplifier, providing clear and powerful audio that can fill any vehicle with rich sound. The MCD360 is designed to support multiple speaker configurations, allowing users to set up their audio system according to their preferences.

The MCD360 comes equipped with Bluetooth technology, enabling seamless wireless connectivity with smartphones and other devices. This feature allows users to stream music effortlessly from their mobile devices, providing the convenience of hands-free calling and easy access to their favorite playlists. The incorporation of Bluetooth also ensures that drivers can stay focused on the road while enjoying their music.

Another standout feature of the MCD360 is its compatibility with various audio formats. It supports MP3, WAV, and other digital audio formats, allowing users to play their music library with ease. The front USB port enhances this capability, enabling users to connect flash drives for direct playback. Additionally, the device offers FM/AM radio options, providing a range of entertainment sources.

User-friendliness is a key aspect of the Clarion MCD360. The intuitive interface is designed to simplify navigation through songs and settings, catering to both tech-savvy users and those who prefer a straightforward experience. The vibrant display ensures readability while driving, making it easy to track playback information without getting distracted.

Moreover, the MCD360 supports audio customization through its built-in equalizer, allowing users to adjust the sound to their liking. With multiple equalizer settings, users can fine-tune the audio output according to their listening preferences, creating a personalized listening environment.

In conclusion, the Clarion MCD360 is a feature-rich car audio system that meets the needs of modern drivers. With excellent sound quality, Bluetooth connectivity, versatile format support, and user-friendly controls, it is a perfect choice for those seeking to upgrade their in-car audio experience. Whether for daily commutes or long road trips, the MCD360 ensures that users enjoy their favorite tunes with clarity and style.