Philips 28PW6816/05 manual Timer function, Locking the set, Locking programmes, Locking the keys

w Check that the mode selector on the side of the remote control is set to TV.

Timer function

This menu allows you to use your TV as an alarm clock.

&Press H.

éSelect FEATURES (J) and press Ltwice. The TIMER menu appears :

FEATURES

• PICTURE	TIMER
• SOUND		10:56
• FEATURES	• TIME
• INSTALL	• START TIME
	• STOP TIME
	• PROG; NO;
	• ACTIVATE

“Press Lto enter and exit the sub-menus and

use keys IJto adjust:

‘TIME: enter current time.

Note: the time is updated automatically each time

the set is switched on using teletext information taken from programme 1. If programme 1 does not have teletext, the update will not take place.

(START TIME: enter the start time. § STOP TIME: enter the stop time.

è PROG; NO;: enter the number of the programme required.

! ACTIVATE: you can set the alarm to be activated:

•ONCE ONLY for a one-off alarm,

•DAILY for a daily alarm or

•STOP to cancel.

çPress Rto set the TV to standby. It will automatically switch on at the time programmed. If you leave the TV switched on, it will only change programme at the time indicated.

Locking the set

You can bar access to certain programmes or completely lock the set by locking the keys.

Locking programmes

&Press H.

éSelect FEATURES (J) and press L.

“Select PARENTAL. CONT. (J) and press L.

FEATURES

• PICTURE
• SOUND	• TIMER
• FEATURES
• INSTALL
	• CHILD LOCK	ACCES CODE
	• PARENTAL CONT	- - - -

•ROTATION

‘Enter your confidential access code.The first time, enter the code 0711 then confirm by re-entering 0711.The menu appears.

(Press Lto go into the menu.

§Use keys IJto select the required programme and confirm with L.The symbol +is displayed alongside the programmes or sockets that have been locked.

èPress Rto exit.

To watch a programme which has been locked you will now need to enter the confidential

code; otherwise the screen will remain blank. The INSTALL menu access is also locked. Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket.

To unlock all programmes

Repeat stages & to ‘ above, then select CLEAR ALL and press L.

To change the confidential code

Repeat stages & to ‘ above, then:

(Select CHANGE CODE and enter your own 4-digit number.

§Confirm by entering it again. Your new code will be stored.

èPress Rto exit from the menus.

If you have forgotten your confidential code, enter the universal code 0711 twice.

Locking the keys

&Press H, select FEATURES (J) and press L. é Select CHILD LOCK (J) and press Lto set

the lock to ON.

“ Switch off the set and put the remote control out of sight.

The set cannot be used (it can only be switched on using the remote control).

‘ To cancel: switch CHILD LOCK to OFF.

8