4 Get started
Supplied accessories
•Remote control
•2 x AAA, 1.5V batteries
•M4 x 10 double sems screw x 4
•AC Power cord
•Cable management tie
•User Manual
•Quick Start Guide
Mounting stand onto TV
Applicable to TVs without mounted stands.
1
2
x 4
Note
•To wall mount the TV, refer to the addendum.
•If you lose the stand mounting screws, please purchase 4 Philips head screws (M4×10) at your local store.
Positioning the TV
Warning
•Do not insert the AC power cord into the power socket outlet before all the connections are made.
•Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
•Before you move the TV, disconnect attached cables to prevent damage to connectors.
In addition to reading and understanding safety instructions, consider the following before positioning your TV:
•Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.
•If the TV is mounted on a swivel base, ensure that no strain is placed on the AC power cord when the TV is swiveled. Strain on the AC power cord can loosen connections.
•The ideal viewing distance for watchingTV is three times its screen size.
•Position the TV where light does not fall on the screen.
•Connect your devices before you position the TV.
Using a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.
Installing the remote control batteries
1 Slide the battery cover off the back of the remote control.
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and − ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
•Remove the batteries if not using the remote control for an extended period of time.
8EN