Philips 32TA3000 user manual Trouble ShootingTips, No power

Page 29

Trouble ShootingTips

Symptoms

Items to Check and Actions to follow

 

 

“Ghost” or double

• This may be caused by obstruction to the antenna due to high rise buildings or hills.

images

Using a highly directional antenna may improve the picture.

 

 

No power

• Check that the TV’s AC power cord is plugged into the mains socket.

 

• Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket

 

and turn on the television again.

 

 

No picture

• Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.

 

• Possible broadcast station trouble. Try another channel.

 

• Adjust the contrast and brightness settings. Try another auto picture setting.

 

• Check if you selected the correct AV source.

 

 

No picture and power

• Your TV has a protective mode in case there is too much heat build-up. Check the

switched on

clearance around the vents of the device to be certain there are no blocking walls or

 

cabinets which would limit the air flow.

 

 

Picture position

Most High Definition receiver boxes also have picture-positioning controls in their menu systems. If the

adjustment

TV cursor controls run out of range before the picture is correctly positioned, the receiver box controls

 

will need to be adjusted.

 

 

No photo, music or

• Check if the source complies with a supported code.

video play or in poor

 

quality only

 

 

 

No sound

• Increase the VOLUME.

 

• Check that the TV is not muted, press the MUTE button on the remote control.

 

• When no signal is detected, the TV automatically switches off the sound. This is proper

 

operation and does not indicate a malfunction.

 

 

Good sound but poor

• Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.

color or no picture

 

 

 

Snowish picture and

• Check the antenna connection.

noise

 

Television not

• Check whether the batteries are working. Replace if necessary.

responding to

• Clean the remote control sensor lens on the monitor.

remote control

• Operating range between TV and the remote control should not be more than approximately twenty feet.

 

• You can still use the buttons on the side of your TV.

 

• Check if the remote control is in the correct mode.

 

 

Control of accessory

• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:

devices

replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from

 

within a radius of approximately four feet.

 

 

The software will not

Possibly the operating system is wrong.

install

Go to www.philips.com/usasupport to see which operating systems are supported.

 

 

PC modes do not

• Check whether connections are correct.

work

• Check whether the source is correctly selected. Press AV button to select the correct source.

 

• Check whether you have configured the computer on a compatible display resolution.

 

 

Standby

Your TV consumes energy less than 2w in the standby mode.

 

 

After improper

If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the

shutdown

TV again will take a longer time than usual.

 

 

Miscellaneous

See Extras, Specifications on this user manual.

 

 

23

Image 29
Contents Quick Start Guide Inside How to make the optimal connection? 如何進行最佳連接? 26TA2800 Quick start guide Cable Box With RF In / Outputs Antenna TVVideo Devices With PC Monitor Connections For Customer Use WelcomeDear Philips product owner Read before operating equipment Important Safety InstructionsAdditional Safety Precautions PrecautionContents Turn the TV on Remote controlMounting the TV on the wall Picture Format button II button / Sound modeSleep button Smart Sound buttonFormat Buttons on the top of theTV To use the menus Introduction How to navigate through the Settings menusStore TV channels TV menu-Install Select the menu languageStore Prog. noFinetune Channel edit Channel settingChannel swap Name editFactory reset Timer TV menu-FeaturesFeatures menu Lock program Auto lockPicture menu TV menu-Picture & SoundSmart picture ContrastSharpness ColorTint Color tempSound menu SettingsSmart sound Virtual surroundTo select connected devices Settings menu to select TV, CVI 1, CVI 2, AV 1, AV 2sideRecord a TV program Picture PC menu-Picture & SoundSetting up the PC mode Personal Computer Monitor Auto adjustManual adjust 26TA2800/32TA2800/32TA3000 26/32 LCD TVSelect Sound in the settings menu No power Trouble ShootingTipsCvbs TV Location CleaningPICTURE/ Display Specification -TV