![](/images/new-backgrounds/1244457/24445711x1.webp)
Remote Control keys
7Active Control (See page 13).
1
2
3
4
5
6
7
8
9
10
11
12
13
AUX
15
16
17
18
19 20
21
22
8MENU
To call up or exit the TV menus.
9 Cursors
These 4 keys are used for selection and adjustment of menu items.
10OK Confirms selection.
11Volume ( – VOL + )
To adjust the sound level.
12Smart Picture /Sound Used to access a series of predefined picture and sound settings (see page 13).
13 /
Numerical keys
For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered before the dash disappears.
14 Screen information
To display/remove the programme number, the sound mode, the remaining time of the sleeptimer and the *signal strength indicator. Press key for more than 5 seconds to display information permanently on screen and press key again for more than 5 seconds to remove information.
14 | 23 |
1Standby ![](/images/new-backgrounds/1244457/24445711xi13.webp)
To set the TV to standby mode. To switch the
TV set on again, press ,
to
, P
2Unused key in TV mode .
3DVD / AUX (see page 6).
4Surround Sound ![](/images/new-backgrounds/1244457/24445711xi18.webp)
To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround, you can experience Dolby Surround Pro Logic sound effects.
5Telextext keys (see page 14).
6AV
To display Source List to select TV or peripheral equipment connected to EXT 1, EXT 2/SVHS2, EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.
15Mode
Select between TV, DVD and AUX mode (see “Remote Control - DVD or AUX on page 6).
16Programme List ![](/images/new-backgrounds/1244457/24445711xi21.webp)
To display / clear the list of programmes.
Use the Î ï keys to select a programme and the Æ key to display it.
17
To display a PIP window on the TV screen (see page 10 on how to use the PIP feature).
18 Sound mode
Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dualå or Dual». The Mono indication is red when in forced position.
19 Screen Format (see page 12).
20DVD / AUX (see page 6).
21Mute
Press to mute or restore sound.
22Selecting TV programmes (P
are displayed for a few seconds. For some TV programmes, the title of the programme appears at the bottom of the screen.
23Previous/Present programme To alternate between the last viewed and present programme.
* The signal strength indicator shows the signal strength of the transmission of the programme you are watching.
5