•TV speakers
If you have connected an audio system to your TV, you can switch off the TV speakers.
This option is only available if EasyLink is set to On. See Menu > Setup > Installation > Preferences > EasyLink.
Select Automatic (EasyLink) to have the sound from your TV automatically reproduced by your audio system.
•Surround mode
To select a more spatial sound if broadcasted or if available from a connected device.
•Headphone volume
Changes the volume of the headphone.
You can mute the TV speakers with ¬ on the remote control.
•Auto volume levelling
Reduces sudden volume differences like at the beginning of commercials or when switching from one channel to another.
Select on or off.
•Delta volume
Levels out volume differences between channels or connected devices.
‡Switch to the channel or device you want to level out the volume difference.
®Select Delta volume in the Sound menu and change the volume level.
•Auto surround
Switches the TV automatically to the best surround sound mode dependant on the broadcast.
Select on or off.
5.4Teletext
Your TV has a 1200 pages memory that stores broadcasted teletext pages and subpages to reduce waiting time.
To select a teletext page see section 4.6 Select a Teletext page.
5.4.1Select a teletext language
Some digital TV broadcasters offer the possibility to select your preferred teletext language. See section 6.1 Automatic installation.
5.4.2Select pagenumber subpages
A teletext page number can hold several subpages. The pages are shown on a bar next to the main pagenumber.
‡Press Teletext.
®Select a teletext page.
ÒPress p or π to select a subpage.
5.4.3Select T.O.P. teletext broadcasts T.O.P. teletext (Table of Pages) is not broadcast by all TV channels. You can easily jump from one subject to another without using pagenumbers.
‡ Press Teletext.
® Press Info.
The T.O.P. overview appears.
ÒUse p or π, o or œ to select a subject.
† Press OK to view the page.
ENGLISH
Use more of your TV | 15 |