7.5.2Decoder channels
Decoders that decode an antenna channel are connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected.
‡Press Menu Ï on the remote control and select Setup > Installation > Decoder > Channel.
®Press π to enter the list.
ÒPress o or œ to select the channel to decode.
† Press p and go back to select Status.
º Press o or œ to select the connector used by the decoder.
◊Press Menu Ï to quit the menu.
It can take a few minutes before a CAM is activated. Removing the CAM will deactivate the digital TV service.
ENGLISH
Installation Decoder
Channel
Preferences Status
Connections assist.
Rename devices
Decoder
Man. network inst.
Clock
Factory settings
7.6Preparing for digital services
Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM) and a Smart card provided by a digital TV service operator. The CAM may enable several services depending on the operator you choose (e.g. Pay TV).
Contact your digital TV service operator for more information and terms.
7.6.1Insert a Conditional Access Module -
CAM
)Warning
Switch off the TV hub before inserting the CAM. Look on the CAM for the correct inserting direction. Incorrect insertion can damage the CAM and the TV.
‡Gently insert the CAM into the Common Interface slot at the side of your TV hub as far as it will go.
®Leave the CAM in the Common Interface slot permanently.
7.6.2Common interface menu
From this menu you access the CAM service you have installed. The applications and their function, the content and the messages on screen come from the CAM service provider.
‡Press Menu Ï on the remote control and
select Features > Common interface. This menu option is available when a CAM is inserted and has made contact with the provider.
Downloaded From | 37 |
Connections |