Channel tuning
çAfter the installation of the TV channels has been done, always make a selection in the Installation menu, Installation mode between Antenna or Cable whether you want to watch Antenna TV channels or Cable TV channels.
)If you make use of a signal splitter do not forget to put the switch in the corresponding position.
Available channels:
-Cable (analog NTSC or digital QAM): max. from 1 to 135
-Terrestrial (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the TV will attempt to tune the channel and it will be added to the map.
If the channel is not acquired, a message will appear that the channel is not available.
When you tune an
çSubchannel selections
The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit channel number entry.
çDigital Channel selection delay
Due to the tuning complexity of subchannel digital programming, the time to select and view a digital channel may take slightly longer than what the viewer is normally accustomed to (as compared to analog channel programs).
Digital channel broadcasts contain program and system data information that must be processed before the channel selection can be displayed.
_________________________
7.3.1 Installation update
This allows you to automatically tune to and update all available channels, without altering the sorting of existing channels.
TV menu / Installation
Channel installation | Installation update |
Autoprogram |
|
Installation update | Start now |
Weak channel installat.. |
|
Installation mode |
|
Channel edit |
|
|
|
Info
ç- New channels found will not be added to any favorite list.
-Already installed channels will not be renumbered.
_________________________
7.3.2 Weak channel installation
This allows you to manually tune weak ATSC channels in order to adjust the antenna and thus optimize signal quality for that channel.This only available for TV channels installed via an antenna connection.
‡Select a channel in the displayed list of TV channels (in the antenna mode).
®The signal strength is displayed and updated continuously as you rotate the antenna.
_________________________
7.3.3 Installation mode
This allows you to select the already stored terrestrial or cable TV channels. Choose for Antenna or Cable whether these signals are present.
_________________________
7.3.4 Channel edit
This allows you to rename, to reshuffle and to uninstall or reinstall the stored channels.
<Press the corresponding color button and follow the on screen instructions.
TV menu / Installation
Channel installation | Channel edit |
Autoprogram | 0 |
Installation update | 1 |
Weak channel installat.. | 2 |
Installation mode | 3 |
Channel edit | 4 |
| ...... |
|
|
Info
_________________________
7.3.4.1 Rename
This allows you to change the name stored in the memory or to assign a name to a channel for which a name has not yet been entered.
‡Select the channel you want to rename.
®Press the red color button on your remote control.
ÒSelect the characters with the cursor up/down. Select the following position with the cursor right.
†Press the green color button or the OK button when finished.
à- Press the yellow color button to delete all characters.The cursor is positioned at the beginning again;
-Press the blue color button to delete the character the cursor is positioned. Enter a new character with the cursor up/down;
-A name can be given to the channel numbers 0 to 999;
-Space, numbers and other special characters are located between Z and A.
ºSelect another channel number and repeat steps 2 to 5.
_________________________
7.3.4.2 Uninstall - reinstall
This allows you to uninstall a stored channel so that it is no longer possible to tune to.This also allows you to reinstall an earlier uninstalled channel.
‡Select the channel you want to uninstall.
®Press the green color button to uninstall the selected channel.
>The uninstalled channel is indicated in the list by an icon in front of the uninstalled channel.
ÒPress the green color button again to reinstall the uninstalled channel.
çUninstalled channels are not reinstalled during an installation update.
18