Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Caution: To reduce the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. Refer servicing to qualified service personnel.

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the prod- uct's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

Retain Instructions

The safety and operating instructions should be adhered to.

Heed Warnings

All warnings on the appliance and in the operating instructions should be adhered to.

Follow Instructions

All operating and use instructions should be followed.

Water and Moisture

The appliance should not be used near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

Ventilation

The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in situation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Power Sources

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization

Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Cleaning

The unit should be cleaned only as recommended by the manufacturer.

Power Lines

An outdoor antenna should be located away from power lines.

Non-Use Periods

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

Object and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Damage Requiring Service

The appliance should be serviced by qualified service personnel when: a) The power supply cord or the plug has been damaged; b) Objects have fallen, or liquid has been spilled into the appliance; c) The appliance has been exposed to rain; d) The appliance does not appear to operate normally or exhibits a marked change in performance; or e) The appliance has been dropped, or the enclosure damaged.

Servicing

The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Product Servicing

In the event your EQ 25.1 fails to operated properly, please contact the dealer where you purchased the unit. Or you may contact AudioSource directly for further assistance.

This manual provides detailed instructions for setting up your equipment. We also offer friendly, toll-free assistance.

1.800.HELP.115

EQ 25.1 Specifications


Frequency Response		10 Hz to 100 kHz ±1 dB	Outputs . . . . .Line 1 (RCA/Unbalanced), Line 2 (XLR/Balanced)
Signal to Noise Ratio		. . . . . . . . . . . . .>95 dB	Control Range	. . . . . . . . . . . . . . . . . . . .±12 dB
Input Impedance		. . . . . . . . . . .47k Ohms	Power Consumption	. . . . . . . . . . . . . . . . . . . .6 Watts
Output Impedance		. . . . . . . . . . .600 Ohms	Dimensions	7.125" x 2.25" x 16.5", 3.25 lbs.
Inputs	.Line 1 (RCA/Unbalanced), Line 2 (XLR/Balanced)

Design and specifications are subject to change without notice.

9300 North Decatur
Portland, OR 97203
Tel. 503.286.9300
Fax 503.978.3302
audiosource@Phoenixgold.com
www.audiosource.net	© 2000 AudioSource, Inc.

Modular Dual Channel Graphic Equalizer, EQ 25.1 specifications

The AudioSource Modular Dual Channel Graphic Equalizer, EQ 25.1, epitomizes flexibility and precision in audio management. Designed for audiophiles and professionals alike, this equalizer provides a comprehensive solution for tailoring sound to meet specific listening preferences.

One of the standout features of the EQ 25.1 is its dual-channel capability, which allows users to independently control the equalization settings for two separate audio sources, enabling both comprehensive system management and enhanced sound quality. Its 10-band graphic equalization allows for precise tuning across the spectrum, providing 31.25Hz to 16kHz frequency control. This range ensures that low bass tones are not overshadowed by mid and high frequencies, resulting in a balanced audio experience.

The EQ 25.1 is equipped with a range of advanced technologies that facilitate both ease of use and optimization of sound. Its discrete analog circuitry minimizes distortion and maximizes clarity, allowing for a clean audio signal that retains the original quality of sound. The rear panel features both balanced XLR and unbalanced RCA inputs and outputs, providing flexibility in connection options and assisting in reducing interference from external sources.

In addition to the graphic equalization capabilities, the AudioSource EQ 25.1 integrates a range of user-friendly features. These include individual power switches for each channel, allowing for efficient use of power and ease in managing the audio setup. The front panel features LED level indicators that help users monitor the performance and avoid distortion caused by excessive output levels.

Another notable characteristic of the EQ 25.1 is its robust build quality. Designed for both home audio systems and professional setups, it boasts a durable chassis that ensures longevity and reliability. The sleek, professional design complements any audio equipment configuration while providing an intuitive interface for easy navigation.

In a world where sound personalization is paramount, the AudioSource Modular Dual Channel Graphic Equalizer, EQ 25.1, stands out as a vital tool for achieving the perfect audio balance. Whether for casual listening, home theater setups, or live sound applications, this equalizer delivers a powerful combination of features, technologies, and characteristics that cater to the demands of modern audio enthusiasts.