Philips 202EL2, 2.02E+04 user manual Safety precautions and maintenance, Operation

Page 3

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor.

It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel.When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

o Temperature: 0-40°C 32-95°F

o Humidity: 20-80% RH

1

Image 3
Contents 202E2 202EL2 Table of Contents Safety precautions and maintenance Temperature 0-40C 32-95F Humidity 20-80% RHOperation Notational Descriptions Information Center in each country WeeeInstallation 202E2/202EL2 Package contents Setting up the monitorInternet and Game Connecting to your PCMain menu Sub menu Resolution notification 100mm How does it work? Smartimage Lite What is it?Why do I need it? How to enable SmartImage Lite?Why do I need it? Philips SmartControl Lite First launch -Wizard First time after installationStart with Standard pane Adjust menu Color menu Color Menu allow you to adjust RGB Page Page Page Task Tray Menu Enabled Task Tray Menu DisabledExit Close SmartControl Lite Philips Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsTypes of Pixel Defects Model LCD panel type TFT-LCDYES Power 202E2 On mode 22.37W typical Energy Consumption Environmental 0C to 40 CMtbf 50,000hrs202E2/30,000hrs202EL2Automatic power saving feature Power Management Definition Automatic PowerSavingLead-free Product ISO Very low energy consumption both in on- and standby modeProduct also comply with the following standards Epeat Electronic ProductEN550241998+A12001+A22003 EN61000-3-22006 Limits for Harmonic Current EmissionFederal Communications Commission FCC Notice U.S. Only Reorient or relocate the receiving antennaTV technician for help EN 55022 Compliance Czech Republic Only Plassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusAchtung Beim Aufstellen Ergonomie Hinweis nur DeutschlandGeforderten Werten entspricht, ist darauf zu achten, daß Nur original-Ersatzteile verwendet werdenPacific Eastern EuropeLatin America North AmericaWhat is excluded? Page Just a click away Just a phone call away Dear CustomerCzech Republic Estonia Fujitsu Services OUBelarus BulgariaSlovakia Romania TurkeySerbia & Montenegro UkraineCompany Name PT. Gadingsari elektronika Prima South Africa AfricaPage Where can I GET More INFORMATION? WHO is COVERED? What is COVERED?What is EXCLUDED? Your warranty does not coverTo GET Warranty Service in Canada Your International Guarantee Dear Customer Screen says TroubleshootingPage Driver from corresponding companies’ web site Q7 How should I clean the LCD surface? Color TemperatureThe six settings