Philips 20PFL4101S, 20PFL4102S Program sort, Manual store, Other settings in the Install menu

Program sort

&Press the MENU key.The TV Menu is displayed on the screen.

TV Menu		Install
Picture
	Sound	Language Æ •	0
Features
	Install	Country Æ •	1
		Auto Store Æ •	2
		Manual Store Æ •	3
		Sort Æ •	4
		Name Æ •	5

éWith the cursor, select the Install menu

followed by the Sort menu.

“Select the programme you want to move using the <> keys and press ≥.

‘Then use the <> keys to select the new number and validate with ≤.

(Repeat steps “ and ‘ for each program you

wish to renumber.

§ To quit the menus, press Ë.

Manual store

This menu is used to store the programmes one at a time.

&Press the MENU key.

éWith the cursor, select the Install menu then Manual store:

TV Menu		Manual Store
	Picture
	Sound	System	Í Europe Æ
Features
		Search
	Install
		Program No.
		Fine Tune
		Store

“System: select Europe (automatic detection*) or Western Europe (BG standard), Eastern Europe (DK standard), United Kingdom

(I standard) or France (LL’ standard).

*Except for France (LL’ standard), you must select choice France.

‘Search: press ≥.The search starts. Once a programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the required programme, this can be entered directly using the 0 to 9 keys.

If no picture is found, consult the possible solutions (p. 14).

(Program No.: enter the required number

with the ≤≥ or 0 to 9 keys.

§Fine Tune: if the reception is not satisfactory,

adjust using the ≤≥ keys.

èStore: press ≥.The program is stored. ! Repeat steps ‘ to è for each programme to

store.

ç To quit the menus, press Ë.

Other settings in the Install menu

&Press the MENU key and select the Install menu:

éLanguage: to change the display language for the menus.

“Country: to select your country (GB for

Great Britain).

This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”

‘Auto Store: to start automatic search for all programmes available in your region. If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes.

Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> keys and validate with ≥.To quit or interrupt the search, press MENU. If no picture is found, consult the possible solutions (p. 14).

(Name: If required, you can give a name to the programmes and external connectors. Use the ≤≥ keys to move around the name display area (5 characters) and the <> keys to select the characters.When the name has been entered, use the ≤ key to exit.The name is stored. Note: on installation, the programs are named automatically when an identification signal is sent.

§ To quit the menus, press Ë.

6