Front Panel Features Rear Panel Features

FRONT PANEL FEATURES

REAR PANEL FEATURES

1.Band Gain LEDs: Indicate for each frequency band how much cut or boost has been applied.

2.Signal/Clip LEDs: Show audio input levels.

3.7-Segment Display: Shows currently selected Program, and shows cut or boost amount when editing a band.

4.Band Select Buttons: Press these to select a particular band for editing.

5.Bypass LED: Indicates that the EQ is bypassed.

6.Power Button: Turns the unit on and off.

7.Up/Down Buttons: Change Program, or increment or decrement Band Gain values.

8.A/B/Link LEDs: Indicate if the current curve display is for channel A, channel B, or is stereo linked.

Note: It is recommended that the DEQ224 be turned off before connecting and disconnecting any sources to the inputs of the unit.

1.Channel A Input: Balanced 1/4" Line Level input to Channel A. -10dBV nominal input, +5dBV maximum input.

2.Channel B Input: Balanced 1/4" Line Level input to Channel B. -10dBV nominal input, +5dBV maximum input.

3.Channel A Output: Balanced 1/4" Line Level output from Channel A. -10dBV nominal output, +5dBV maximum output.

4.Channel B Output: Balanced 1/4" Line Level output from Channel B. -10dBV nominal output, +5dBV maximum output.

5.9VAC Power Input: 9VAC barrel jack input. Connect only Alesis 9VAC "P3" power supply to this jack. Connecting any other power supply to this jack may cause irreparable harm to the unit.