5 - Enter - To confirm the text you entered.
6 - Backspace - Deletes the character in front of the text cursor.
7 - ! Special character - To open the onscreen keyboard to select accented letters or symbols.
8 - Azerty letter - Letters available if the keyboard layout is set to Azerty in the Setup menu.
*Your remote control has a Qwerty / Azerty or a Qwerty / Cyrillic keyboard, depending on your region.
Qwerty and Cyrillic
Overview of a Qwerty / Cyrillic keyboard.*
Uppercase and lowercase
To type an uppercase letter, press the ((Shift) key just before you type the letter.
To type several uppercase letters consecutively, press and hold the (key while typing. To type uppercase constantly, press the (key for 2 seconds to switch the keyboard in uppercase mode.
To switch out of uppercase mode, press the (key again. If no keys are pressed for 20 seconds, the uppercase mode switches off automatically. Also, if you press another modifier key, like Fn or !, you switch out of uppercase mode.
Numbers and punctuation characters
1 - Fn key - To type a number or punctuation character. 2 - (Shift - To type uppercase letters.
3 - y Spacebar
4 - Arrows for navigation.
5 - Enter - To confirm the text you entered.
6 - Backspace - Deletes the character in front of the text cursor.
7 - ! Special character - To open the onscreen keyboard to select accented letters or symbols.
8 - î Cyrillic keyboard switch - To switch to the Cyrillic keyboard or back to Qwerty.
9 - Cyrillic letter - Letters available if the keyboard is switched to Cyrillic.
*Your remote control has a Qwerty / Azerty or a Qwerty / Cyrillic keyboard, depending on your region.
Writing text
With the keyboard on the back of the remote control, you can write text in any text field on screen. Turn the keyboard facing upwards to activate the keyboard keys. Hold the remote control with two hands and type with both thumbs.
Enter text
To enter text in a text field on screen, select the text field and start typing.
Press Enter to confirm the text.
To type a number or punctuation character, press the Fn key just before you type the number or punctuation character you need. You can switch the Fn mode on or off as you do for the uppercase mode.
Internet
You can use the Fn key to enter www. or .com.
Accented letters and symbols
Accented letters and symbols are not available on the remote control keyboard. To type such a character, you can open the onscreen keyboard.
To open the onscreen keyboard, press !. In the onscreen keyboard, you can navigate to the character you need. Switch the keyboard layout with the colour keys. Press OK to enter a character. The onscreen keyboard disappears when you press a character on the remote control keyboard.
Alternatively, you can enter special characters with the remote control SMS/text keypad on the front of the remote control.
Qwerty, Azerty and Cyrillic keyboard
The standard layout of the remote control keyboard is Qwerty.
Azerty keyboard
Depending on your region, the remote control keyboard can be set to Azerty. The Azerty characters are shown at the top right of the relevant keys.
To set the keyboard layout to Azerty, . . .
1 - Press hand select SSetup and press OK to open the Setup menu.
2 - Select TV settings > General settings > Remote control keyboard.
3 - Select QWERTY or AZERTY.
Cyrillic keyboard
Depending on your region, the remote control keyboard can be switched to Cyrillic characters.
The Cyrillic characters are shown at the top right of the keyboard keys.
To write Cyrillic characters, press î on the remote control. Press î again to switch back to Qwerty.
TV / Remote control | 23 |