Philips 9P5511C1 manual RED/BLUE Convergence, Select Convergence con- trol, Remember. Convergence

PICTURE MENU CONTROLS (CONTINUED)

RED/BLUE CONVERGENCE

Convergence is the correct lin- ing up of the red and blue

light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are nec- essary for your TV.

BEGIN

1Select CONVERGENCE con- trol.

With PICTURE MENU (2 of 2) on screen, move the RED highlight

with the MENU buttons. Then press the MENU button.

2If there is RED or BLUE color fringing on the White cross, press the MENU button to continue.

3Press the MENU buttons to move the red or blue cross directly over the white cross on the TV screen.

The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).

4Press the STATUS button to clear the screen when convergence adjustments are complete.

STOP

SMART HELP

Remember. Convergence

MAIN MENU
PICTURE	SOUND
FEATURES	HELP
1ST TIME SETUP	EXIT

4				1 2
	STATUS	CH	POWER
	VOL	MENU		VOL
	-			+
	M UTE	CH	S URF
1	1	2	3
	4	5	6
3	7	8	9
		0
			SLEEP

PICTURE MENU
COLOR	TINT
BRIGHT	PICTURE
SHARP	CLEARVIEW
EXIT	MORE...

	1 OF 2
PICTURE MENU
CONVERGENCE
FLESH CORRECTION
EXIT	MORE...
	2 OF 2

If there is RED or BLUE

fringe on the WHITE cross, use this adjustment to improve the picture.

2

Press "M" to Continue

- or -

Press "" to Return

has been set at the factory for best viewing, but if one or more of the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.

3

Use the keys to merge the

RED fringe into the WHITE

cross. Press "M" to Continue.

NOTE: Adjustments for “Multi-Point” on-	MULTI-POINT CONVERGENCE
screen color fringing can also be made as part	Use the	keys to adjust
of the TV’s Convergence control system.
Follow the TV’s on-screen menu directions to		Press "M" to Save
select individual screen areas that can be read-
		Press "	" to Undo
justed and set for varying red/blue color fring-
ing conditions. These multi-point settings can
then be “Saved” to memory for the specific	Press "M" to Adjust or
areas of the TV screen (or Factory Settings for	Press "STATUS" to Continue
convergence can be recalled and put back into		Press "	" to
place for use).		recall Factory Settings

8