Connect Peripheral Equipment
There is a wide range of video and audio equipment that can be connected to your TV. The following connection diagrams show you how to connect them.
Preparation
Remove the backplate at the back of the TV as shown on the illustration opposite.
Lay the LCD TV with the screen down on a table as it will be easier to connect your peripheral equipment. Please take your precautions not to damage the screen.
Video recorder
CABLE 
DC 12V | ANT IN | Y | Pb | Pr | PC INPUT |
x 75
COMPONENT INPUT (480i)
1
2
3
VCR
VIDEO (MONO) L AUDIO R | |
IN | AV |
If you are using only mono equipment, connect only the VIDEO and the AUDIO L (Mono) ports.
If your VCR has an S-VHS video jack:
For improved picture quality, connect a
Watching VCR
&If you use connection 2, select the TV channel 3 or 4.
ŽIf you use connection 3, select VIDEO or
How to connect
&Connect the supplied antenna cable 1 to the RF IN port of your VCR.
ŽConnect another RF cable 2 from the output OUT of your VCR to the x
input of your TV. Better quality when playing from your VCR can be obtained if you also connect the Video,Audio Left
and Right (only for stereo equipment) cables 3 to the VIDEO, AUDIO L and R
inputs AV.
ÒInsert a video tape in the VCR and press the PLAY button.