User Manual BDL6551V
4.2.5.CONFIGURATION 1 MENU
|
|
| CONFIGURATION 1 |
|
|
|
|
| |
|
|
| AUTO ADJUST |
|
|
|
| POWER SAVE | ENGLISH |
|
|
| LANGUAGE | |
|
|
| PANEL SAVING | AUTO |
|
|
| ||
|
|
| COLOR SYSTEM | |
|
|
| CONFIGURATION RESET |
|
|
|
| FACTORY RESET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sel |
|
|
|
|
| Adjust | Enter | Back | Quit |
|
|
| |||||||
|
|
| |||||||
|
|
|
|
| |||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
AUTO ADJUST
Note: For the VGA input only.
Use this function to let the monitor automatically optimize the display of VGA input image. Press the SET button to adjust.
POWER SAVE
Set the monitor to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
•RGB - Select ON to let the monitor enter DPMS mode when no signal can be detected from the HDMI,
•VIDEO - Select ON to let the monitor enter power saving mode when no signal is detected from the VIDEO,
LANGUAGE
Select the language for the OSD menu.
Use the PLUS/MINUS button to select a language.
PANEL SAVING
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the SET/ PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
•COOLING FAN - Set the working pattern of the monitor’s internal cooling fan. Select AUTO and the cooling fan will only be activated when the monitor reaches a certain temperature. Select ON and the cooling fan will work constantly when the monitor power is on. Use the PLUS/MINUS button to make selection.
•BRIGHTNESS - Select ON and the brightness of the image will be reduced to an appropriate level, and the BRIGHTNESS setting in the PICTURE menu will become unavailable. Use the PLUS/MINUS button to make selection.
•PIXEL SHIFT - Select the time interval for the monitor to slightly expand the image size and shift the position of pixels in four directions (up, down, left, and right). Use the PLUS/MINUS button to make selection
COLOR SYSTEM
Select the color system depending on the input video format.
Use the PLUS/MINUS button to toggle between
• AUTO | • PAL 4.43 |
• PAL 3.58 | • SECAM |
• NTSC 4.43 | • NTSC 3.58 |
| RETURN TO THE CONTENTS |