Philips DVP720SA manual Receiver has a PCM, Dolby Digital, or MPEG2 decoder, Eng

							Connections
Optional: Connecting to an					Optional: Connecting Digital AV
Audio System					Receiver			lish
								Eng
STEREO								AV Receiver
					OPTICAL
				OPTICAL	AUDIO
			AUDIO		IN
				IN
					DIGITAL
				DIGITAL
					OR
Y			CENTRE		DIGITAL AUDIO OUT	CVBS		Y
					PCM/MPEG2/Dolby Digital
	L	L		L
	R	R		R
Pb	STEREO	FRONT	SUB-	REAR	COAXIAL OPTICAL	S-VIDEO	Pr	Pb
			WOOFER

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections

(CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

Receiver has a PCM, Dolby Digital, or MPEG2 decoder

1Select one of the video connections

(CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the COAXIAL or OPTICAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

3Set the DVD Player’s Analog Output to ‘Stereo’ which delivers sound from only the two front speakers and subwoofer.

(see page 25 “Setting the analogue output”).

Helpful Hints:

–Some DVDs are copy protected.You connot record the disc through a VCR or digital recording device.

–You cannot hear or record the SACD or MP3-CD playback if you use the digital connection.

–If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

9

01-34 DVP720_AP 9 18/03/2004, 10:383139AM 246 13521