Philips RCP7005TP2L owner manual Preparation, Normal Playback VHS

Page 43

Preparation

Before using the remote control, press the VCR but- ton to select the device to be operated.

Turn the TV on and select the video input source con- nected to the Recorder.

Audio system: Turn the audio system on and select the input source connected to the Recorder.

Normal Playback VHS

1

Insert a prerecorded video cassette.

The

indicator will light and the Recorder will power-

up automatically.

Make sure that the TIMER indicator in the display window is not lighted. If it is, press 1 once.

If a tape without a safety tab is inserted, the Recorder will start playback automatically.

2PLAY icon appears on the TV screen.Press PLAY (N) once.

It is not necessary to select the tape speed for play- back. It will be automatically selected by the Recorder.

3STOP icon appears on the TV screen.

If the tape reaches the end before STOP (x) is pressed,

the Recorder will automatically stop, rewind and eject the tape, and turn itself off.Press STOP (x) to stop playback.

otes

If you wish to watch the DVD playback during the VCR play- back, press DVD (or SOURCE) to change to DVD mode and perform the DVD palyback. If you press VCR (or SOURCE) to watch the VCR playback again, playback resumes from the point where playback was interrupted (PAL tape).

You cannot playback for the both DVD and VCR at the same time.

Tracking Control VHS

Auto Tracking

The automatic tracking function adjusts the picture to remove snow or streaks.

The AUTO TRACKING function works in the following cases:

A tape is played back for the first time.

Tape speed (SP, LP) changes.

Streaks or snow appear because of scratches on the tape.

Manual Tracking

If noise appears on the screen during playback, press either v/V on the remote control or

CHANNEL (v/V) on the front panel until the noise on the screen is reduced.

In case of vertical jitter, adjust these controls very carefully. Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 sec- onds.

VCR Mode Tape Playback

Special Effect Playback VHS

Special effects playback notes

Horizontal lines (noise bars) will appear on the TV screen. This is normal.

The audio is automatically muted during special effect modes, so there is no sound during search.

During the high-speed picture search modes, a short time is needed to stabilize tape speed when re-entering the PLAY mode. Slight interference may be observed during this time.

Search

This function lets you visually search forward and back- ward for a desired scene on your tape.

1Press REW (m) or FWD (M) during playback. The Recorder will be activated in the SEARCH mode.

If the Recorder is left in the SEARCH mode for more than 3 minutes, the Recorder will automatically enter the PLAY mode, to protect the tape and video heads.

2To return to playback, press PLAY (N).

Still Picture and Frame-by-Frame Playback

1Press PAUSE/STEP (X) during playback. A still picture appears on the TV screen.

If a still picture vibrates vertically, stabilize it by using v/V on the remote control.

If the Recorder is left in the STILL mode for more than 5 minutes, the Recorder will automatically enter the STOP mode to protect the tape and video heads.

2Press PAUSE/STEP (X) repeatedly to advance the video picture one frame at a time while viewing a still picture.

3To return to playback, press PLAY (N).

Slow Motion

1While in still mode, press FWD (M).

The tape will be played back at a speed 1/19 times slower than the normal speed.

During slow playback, use v/V on the Remote Control to minimize noise bands.

If slow motion mode continues for more than 3 minutes, the Recorder will automatically change to normal play mode.

2To return to playback, press PLAY (N).

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

2Press DISPLAY repeatedly to display the real-time counter on the TV screen.

3At the point you want to locate later, reset the real- time counter to 0:00:00 by pressing CLEAR.

Continue to play or record.

4Press STOP when recording or playback finishes.

5Press RETURN.

The tape automatically stops when the tape counter returns to about “0:00:00”.

English

43

Image 43
Contents Manuel de l’utilisateur Bedienungsanleitung Safety Precautions Cesky IndexDansk Table of Contents About the symbols for instructions Recordable Discs OverviewPlayable Discs Disc-related terms About SymbolsTypes of video CDs How are DVD+R and DVD+RW discs different? DVD+RW mode recordingDVD+R mode recording About DVD+R and DVD+RW discDisc type Disc format Recording mode Functions Disc types and recording formats, modes, and settingsAbout DVD recording Reset the Recorder Remote Control Operation RangeHandling the unit PrecautionsCleaning the unit Cleaning discsFront Panel Hi-Fi Disc type indicatorsIndicates when a Nicam broadcast is being received Function Display WindowREW / FWD m/M Remote Control OverviewV / V left/right/up/down Numerical buttonsImportant Note About Ferrite Core Rear PanelConnections Connecting to the AerialConnections to Your TV Aerial/Decoder Cable TV Connecting to a cable box or satellite receiverConnections Connecting an external Decoder box Aerial/Cable TV Wall Jack Cable Box or Satellite ReceiverDigital Multi-channel sound Connections Connecting to an AmplifierAmplifier Receiver Ote Connections Connecting a Digital CamcorderFront Front of Recorder General Operation Before Operation Initial SettingsAuto Programming Program Edit Before OperationProgram Edit Sort TV channels manually Setting the Decoder On/OffSetting the Nicam Auto/Off Program EditTV Aspect Clock SetVCR Play Aspect Progressive Scan Factory SettingVCR Play System AV2 ConnectionVocal Dolby DigitalSampling Frequency DRC Dynamic Range ControlIf you forget your 4-digit code Set PasswordBefore Operation Lock Parental Control RatingVCR Record Mode Disc Record ModeDV Record Audio VCR Record SystemAuto Chapter Finalize menu appears Disc FinalizeAbout DivXR Disc ProtectAuto Play Changing TV Audio Channel General Explanation On-Screen DisplayDisplaying Information on-screen Changing TV ChannelsSelection Method Menu OptionsProgress bar and elapsed playing time Recording dateRecording mode, etc Shows playing speedStill Picture and Frame-by-Frame Playback Operation with DVD and Video CD Playing a DVD or Video CDMoving to another Title Moving to another CHAPTER/TRACKTime Search Operation with DVD and Video CD General FeaturesSlow Motion Repeat A-BMarker Search Finding Locations on a Disc VCD Operation with DVD and Video CDChanging the Audio Channel 3D Surround 3D SURPlayable Audio format Playing a DivX Movie DiscPlayable DivX file .avi, .divx Playable DivX subtitle Playable Codec formatMusic-CD menu options MP3 Audio CD and MP3/Windows MediaTM Audio OperationMusic menu options Music-Audio CD menu options CDSearch CD Pause CDMoving to Another Track CD MP3 Repeat Track/AllFolder/Off CD MP3Program List menu options CD MP3 View Slide Shows Jpeg File Operation Viewing a Jpeg File JpegSkip Images Rotate ImagesPreparation VCR Mode Tape Playback Special Effect Playback VHSNormal Playback VHS Basic Recording Basic Recording from a TV Instant Timer RecordingCopying from DVD to VCR Basic RecordingCopying from VCR to DVD Timer Recording Stopping a Timer Recording in Progress Timer Recording with Showview SystemChecking Timer Recording Details Canceling a Timer RecordingRecording from a Digital Camcorder Recording from an External InputTroubleshooting Recording from an External Input What is DV?DV-Related Messages Using the Chapter List menu +RW Using the Title List menu +RWTitle List and Chapter List Menu Menu of the title. refer to right On this Using the Title List menu +RUsing the Chapter List menu +R Full Play Starts playback Selected title including the hidDeleting a Title +RW Title and Chapter EditingAdding Chapter Markers +RW Changing Title ThumbnailsDubbing Hide Naming a Title +RW +RCombining Two Chapters Into One Chapter DeleteSelect ‘Protect’ option on the options Protect a Title +RWPlay Full Play Chapter Delete Edit DubbingDivide One Title Into Two Hide a Title/Chapter +RWPlay Full Play Chapter Delete Protect Title Name Overwrite Recording +RW Additional InformationCode Language Language Code ListCode Country Area Code ListSymptom Cause Solution TroubleshootingMoisture Condensation TroubleshootingSpecifications

RCP7005TP2L specifications

The Philips RCP7005TP2L is a sophisticated LED projector that stands out in the realm of home entertainment systems. Designed for users seeking quality projection without compromising on portability, this projector delivers impressive performance coupled with advanced features that cater to modern multimedia needs.

One of the main features of the RCP7005TP2L is its compact design, which allows for easy transport and setup in various settings, whether for a cozy movie night at home or an outdoor gathering. Its lightweight structure does not compromise its robustness, making it an ideal option for users who need a projector that can be moved swiftly and safely.

In terms of display technology, the Philips RCP7005TP2L employs DLP (Digital Light Processing) technology, known for its vibrant colors and sharp image clarity. The projector boasts a native resolution that significantly enhances the viewing experience, ensuring that images and videos are crisp and detailed, perfect for displaying high-definition movies or even presentations.

The RCP7005TP2L also features connectivity options that cater to a variety of devices. It includes HDMI ports for seamless compatibility with modern laptops, gaming consoles, and streaming devices. The built-in USB ports enable users to project content directly from USB flash drives, offering convenience for quick access to files and media without the need for additional devices.

Another standout characteristic of this projector is its energy efficiency. The LED lamp not only contributes to a longer lifespan but also reduces power consumption compared to traditional lighting systems. This means users can enjoy extended viewing sessions without the worry of frequent bulb replacements.

Furthermore, sound quality is enhanced with built-in speakers, ensuring that audio complements the visual experience effectively. However, for those seeking an immersive sound experience, there is also an option to connect external audio devices via Bluetooth or audio-out jack.

The Philips RCP7005TP2L remains a noteworthy choice for anyone looking to bring cinematic experiences into their living space or on the go. Its combination of portability, advanced display technology, versatile connectivity options, and energy conservation makes it a compelling option for various users, from families to professionals. With this projector, Philips continues to embody innovation and versatility in home entertainment solutions.