Philips DVDR3320V user manual Connection to an Amplifier

RF coaxial connection

Connect the RF.OUT jack on the Recorder to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R).

Audio connection

Connect the Left and Right DVD/VCR AUDIO OUT jacks on the Recorder to the audio left/right in jacks on the TV using the supplied audio cables (A1 or A2).

How to set the Recorder’s RF output channel

1.When the Recorder is turned off, press and hold CHANNEL (V/v) on the front panel for more than five seconds. [RF-03] or [RF-04] appears in the display window.

2.Press CHANNEL (V/v) to change the RF output channel (RF-03 or RF-04).

3.Tune the TV to this channel.

Video connection

Connect the DVD/VCR VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable supplied (V).

Note:

If you use this connection, set the TV’s source selector to

VIDEO.

S-Video connection

Connect the S-VIDEO OUT jack on the Recorder to the S-Video in jack on the TV using the optional S- Video cable (S).

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the Recorder’s progressive scan output for the highest video resolu- tion possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the Recorder to the correspon- ding in jacks on the TV using an optional Y Pb Pr cable (C).

Notes:

•Set Progressive Scan option to [ON] in the setup menu, see page 20.

•Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

•When you use Component Video signal, set the Progressive Scan to [OFF] on the setup menu.

Connection to an Amplifier

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the Recorder to the audio left and right in jacks on your amplifier, receiv- er, or stereo system using the audio cables (A) sup- plied.

Rear of Recorder

A X

LRCOAXIAL

AUDIO INPUT DIGITAL INPUT

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

14