Philips 60PW9363 Connecting AN HD Receiver to the HD INPUT-AV 4 Jacks, Connect coaxial cables

Page 15

Connecting Accessory Devices to Your TV

CONNECTING AN HD RECEIVER TO THE HD INPUT-AV 4 JACKS

Digital equipment with a 1080i or 480p output is compatible with the HD INPUT-AV 4

video jacks.

NOTE: This television is designed to be compati- ble with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manufacturer, you may encounter some digital equipment that will not properly display pictures on the TV.

To make the connections shown in this example, you will need:

one S-Video cable

three cables for video connections (standard RCA-type phono plugs)

four cables for audio connections (standard RCA-type phono plugs)

one coaxial cable (75).

NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.

1 Connect S-VIDEO and audio cables. NOTE: This example uses

INPUT-AV 1. You can use INPUT-AV 2 or the side input jacks if you want.

Connect an S-VIDEO cable from the HD receiver’s S-VIDEO jack to the TV’s INPUT-AV 1 S-VIDEO jack.

Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s INPUT-AV 1 L(eft) and R(ight) AUDIO jacks.

2 Connect component video and audio

cables to the TV’s HD inputs.

Connect from the YPRPB jacks on the HD receiver to the TV’s HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.

Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s HD INPUT-AV 4 L(eft) and R(ight) AUDIO

 

jacks.

3

Connect coaxial cables.

• Connect the coaxial cable lead-in from

your cable outlet, cable converter box, or

VHF/UHF antenna to the IN FROM ANT jack on the HD receiver.

• Connect a coaxial cable from the OUT TO TV jack to the ANTENNA IN 75jack on the TV.

• Connect the coaxial cable lead-in from a satellite dish antenna to the SATELLITE IN jack on the HD receiver.

4 Refer to the directions-for-use manual that came with the HD receiver for setup instructions.

3

 

 

 

 

 

 

 

 

Back of TV

 

 

ANTENNA IN 75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HD INPUT-AV 5

 

 

 

 

 

 

 

 

 

 

 

DVI

 

2

 

 

 

 

 

 

 

 

 

 

HD INPUT-AV 4

 

 

 

 

 

 

 

 

 

 

G/Y

 

 

 

 

INPUT-AV 1

 

1

 

INPUT-AV 2

R/Pr

 

2

 

1

 

 

 

 

 

 

 

 

 

 

Y

 

 

 

B/Pb

 

 

 

 

VIDEO

 

VIDEO

 

 

 

 

 

SL-VIDEO L

 

 

S-

VIDEO

 

 

Signal

 

 

L

L

V L

L

 

 

 

 

 

 

 

 

 

SYNC

 

 

from

 

 

 

AUDIO

Pr

 

AUDIO

 

 

H

AUDIO

 

 

 

 

R

 

 

R

 

 

R

R

 

Satellite

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dish

 

 

AUDIO

AUDIO

 

 

 

 

 

 

 

 

 

 

Y

L

L

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR

 

 

 

OUT TO TV

 

 

 

 

 

 

 

 

CONTROL

 

 

CH 3

 

 

 

 

 

PB

R

R

 

 

 

 

 

 

 

 

 

 

 

 

 

CH 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

 

 

 

 

 

 

 

RF

 

 

 

AUDIO OUT

 

 

 

 

 

 

 

PR

 

 

 

 

 

 

 

 

 

 

 

PHONE JACK

REMOTE

VIDEO

VIDEO

S-VIDEO

 

 

 

IN FROM ANT

SATELLITE IN

 

 

 

Back of HD Receiver

 

 

Cable TV or

3

 

3

 

(example only)

 

 

 

 

 

 

 

 

Antenna Signal

 

 

 

 

 

 

 

 

 

HELPFUL HINTS

HD receivers will supply stereo sound to the TV only through the audio left and right cables, not through the coaxial cable.

Making a standard connection along with the HD connection as shown in the example (S-VIDEO) on this page will allow you to see the receiv- er’s on-screen menu and a picture (valid signal) from the receiver should it be switched to SD mode.

The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs. Your HD receiver may use RCA or BNC output jacks. If your HD receiver comes with BNC jacks, you will need to purchase BNC-to- RCA adapters to connect the receiver to the TV. You should be able to purchase these adapters at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.

 

 

 

OR

BNC-to-

BNC

Adapter

RCA

RCA

Connector

Fitted to

Connector

Adapter

 

Connection

 

The HD INPUT-AV 4 jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by manu- facturer. No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both component video and RGB outputs, component video is the suggested connection to use.

The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture color looks grossly incorrect, try changing either the receiver’s or TV’s color space. See the receiver’s directions-for-use manual for information on setting its color space. Or see page 59 in this manual for setting the TV’s AV4 color space.

AV4 and AV5 do not function with the PIP feature. They cannot be dis- played in the PIP window, nor can the PIP window be displayed when those signal sources are being viewed on the main screen.

15

Image 15
Contents Hdtv Monitor Warranty Verification Important Safety Instructions Contents Virtual Dolby* Surround referred to as Dolby Virtual FeaturesVideo Composite Jack Cable UsedA/V with RCA-type Phono Plug JACKS, CABLES, and ConnectorsINPUT-AV 2, and TV’s side jack panel Panel Overviews Standard Inputs and OutputsWhatYou Can Connect to Standard Panel Jacks Video super video jacks-comWhatYou Can Connect to High-definition Input Jacks Panel Overviews HIGH-DEFINITION InputsAV2 Connecting a VCRBack of VCR Example only Connecting a VCR and Cable BOXConnecting and Using AN Audio HI-FI System with Your TV Back of DVD Example only Connecting a Standard DVD PlayerAV4 Connecting a DVD Player with PROGRESSIVE-SCAN CapabilityConnect the S-VIDEO OUT jack on Connecting AN S-VIDEO DeviceConnecting AN HD Receiver to the HD INPUT-AV 4 Jacks Connect S-VIDEO and audio cables. Note This example usesConnect coaxial cables Connecting a Camcorder Connecting and Using Headphones with Your TV VCR Programming the TV Remote to Work Accessory DevicesPlease read through all the steps before beginning Using the CODE-ENTRY Method to Program Your TV RemoteUsing the Search Method to Program Your TV Remote VCR DIRECT-ENTRY Codes for A/V Accessory DevicesTelevision CH & TV/VCR Using the TV Remote with Accessory DevicesSource you want to watch Using the AV and Source Select ButtonsAutoSound Options Using AutosoundColor Picture Using AutopictureSurf List Empty Using AutosurfProgram List CVI Using Program List and Alternate ChannelSleep Timer Control UsingPicture-adjustment Options Adjusting the Picture ControlsPicture Setting the EYE Fidelity ControlMIN Setting the Dynamic Contrast ControlAVL Adjusting the TREBLE, BASS, and Balance ControlsUsing the AVL Audio Volume Leveler Control Selecting the SURROUND-SOUND Modes Selecting a Surround-sound Option Using Remote ControlSelecting the STEREO/MONO Sound Mode Selecting the SAP Second Audio Program Feature Selecting SAP Using Remote ControlSelecting SAP Using TV Buttons Speakers Using the Bass Boost ControlFeatures Setting the ClockDisplaying the Time Time Setting the TIMER’S Start Time and Stop TimeSelecting the TIMER’S Channel Setting the TIMER’S Activate Control TV TV-Y7 Directed to Older Understanding AutolockTerms PG-13 Parents StronglyFeatures Setting UP the Autolock Access CodeAccess Code Using Autolock to Block ChannelsFormat Using Autolock to Block by Movie RatingUsing Autolock to Block by TV Rating Control does not affect channel blocks see Turning the Autolock Blocking Control on or OFFUsing Autolock to Block Unrated Broadcasts Using Autolock to Block Broadcasts That have no Rating VOL Reviewing Your Current Autolock SettingsMute Using the Closed Captioning ControlSelecting a Picture Format Using the Remote Control Using the PICTURE-FORMAT ControlSelecting a Picture Format Using the TV Buttons Turning Active Control on or Off Using the TV Buttons Using Active ControlHD INPUT-AV Product Type Model SpecificationsSetting Color Space for HD INPUT-AV Video-game images and scoreboards Care and CleaningTV has no power TroubleshootingYou are not able to get sound Glossary of Television Terms Index Canada Factory Service LocationsAtlanta Cleveland Chicago This page is intentionally left blank This page is intentionally left blank This page is intentionally left blank This page is intentionally left blank This page is intentionally left blank Projection Television Limited Warranty

60PW9363, 55PW9363, 51PW9363 specifications

The Philips 51PW9363, 55PW9363, and 60PW9363 are part of Philips' high-quality line of rear projection televisions that were notable for their impressive picture quality and innovative features at the time of their release. These models exemplify the advancements in display technology, providing a compelling viewing experience for film and television enthusiasts.

One of the primary characteristics of these televisions is their use of advanced DLP (Digital Light Processing) technology. This technology utilizes micro mirrors to project images, which leads to brighter and sharper images with greater color accuracy compared to traditional CRT televisions. DLP also enables superior motion handling, making these models ideal for fast-paced action films and sports.

The screens on the Philips PW9363 series range from 51 to 60 inches, providing ample display size for an immersive viewing experience. The televisions boast a resolution of 1280x720 pixels, which is sufficient for high-definition content and contributes to a clear picture quality. Additionally, they incorporate a wide viewing angle feature, allowing users to enjoy consistent picture quality from various positions in the room.

Another defining feature of the Philips PW9363 series is its Ambilight technology. This unique feature enhances the viewing experience by extending the colors of the on-screen image into the surrounding environment. It creates an atmospheric effect that can make movies and video games more engaging. The Ambilight system is adjustable, allowing users to customize the intensity of the colors based on their preferences.

Connectivity options on these models include multiple HDMI inputs, component video inputs, and a digital audio output. This variety allows users to connect various devices such as Blu-ray players, gaming consoles, and sound systems, ensuring a versatile home theater setup.

In addition to stellar picture quality and connectivity, the Philips PW9363 series is engineered with user-friendly features like an intuitive remote control and built-in preset TV settings that cater to different viewing scenarios. These televisions also include an integrated tuner for digital broadcasts, providing convenience for users to access regular television programming without the need for additional devices.

Overall, the Philips 51PW9363, 55PW9363, and 60PW9363 stand out for their combination of DLP technology, Ambilight features, and user-centric design, making them a solid choice for consumers seeking quality entertainment options in the home theater landscape.