USING THE MENUS
Using Manual Converge : Converge Red/Blue
Using the Auto IntelliSense® feature, you can automatically adjust con- vergence in 20 seconds or less (see the previous page). Also, if you desire, you can use the Manual Converge controls to make additional convergence adjustments to suit your personal preferences or to further
Note : Allow the TV to warm up for 20 minutes before adjusting conver- gence.
1 | Select MANUAL CONVERGE in the PICTURE menu. |
2 | Press the cursor down and select either CONVERGE RED |
or CONVERGE BLUE. | |
| Note : If various images in the picture have red outlines, |
| select CONVERGE RED. If various images in the picture |
| have blue outlines, select CONVERGE BLUE. |
3 | Use the cursor right, left, up, or down to adjust the cross |
hair until the color outline is gone. The adjustment is auto- |
matically saved in the TV’s memory when you exit the adjust mode.
:PICTURE
PICTURE
MANUAL CONVERGE
GCONVERGE RED •‰
• CONVERGE BLUE
• MULTIPOINT RED
• MULTIPOINT BLUE
• SAVE MULTIPOINT
•
Converge Red
Converge Red
4 | Press the MENU key to return or the m key to switch the |
menu off. |
Check the TV picture. If any color outlines remain around the images, use the MULTIPOINT RED (for red outlines) or MULTIPOINT BLUE (for blue outlines) control. See the next section for instructions for using those controls.
16