Philips 55PP9910 Setting UP the Autolock Access Code, Press the Cursor Down button twice to

Press the CURSOR

6 DOWN button three times, then the CURSOR RIGHT button to open the New Code screen.

Enter your new four-digit

7 code twice.

Press the INFO/EXIT but-

8 ton exit the menu.

Use these steps to reset

9 your code if you lose it. Instead of 0000 in step 5, use 0711. This is the reset code.

Record your personal code below:

21

ADVANCED MENU FEATURES

SETTING UP THE AUTOLOCK™ ACCESS CODE

Your AutoLock™ access code allows you to enter the AutoLock™ sub- menus to set up or turn off blocking. Your access code is also the “key” that unlocks programs or channels that are

being blocked by AutoLock™.

Press the MENU button on

1 the remote control to show the onscreen menu.

Press the CURSOR

2 DOWN button twice to

highlight FEATURES.

Press the CURSOR RIGHT

3 button. Then press the CUR- SOR DOWN button once to highlight the AutoLock control.

Press the CURSOR RIGHT

4 button to activate the AutoLock menu.

Press 0,0,0,0 on the remote

5 control. The AutoLock menu will appear.

PICTURE	TIMER	FEATURES
SOUND	AutoLock		TIMER			TIME
FEATURES	PIP
			AutoLock			START TIME
INSTALL	CLOSED CAP
			PIP SOURCE			STOP TIME
	FORMAT
			CLOSED CAP			CHANNEL
			CAP OPTIONS			ACTIVATE
8		FEATURES
	1		TIMER
			AutoLock
			PIP
			CLOSED CAP
			CAP OPTIONS
	3,4	Autolock
2,		Enter	access		code:
6	5,
	7	Autolock
		Set blocking
		Block channel
		Block	by	rating
		Setup Code			˙
		¸
		Autolock
		Enter new access code:
		*	*	*	*
		Please re-enter new access code:
		*	*	*

HELPFUL HINTS

•If you discover that your access code has been changed, you can assume that blocked channels may have been viewed.

•For the AutoLock to work with digital channels, the AutoChron must be set. See panel 29.