Philips IT-DSR1000/S, DSR 1000 manual Selecting the Channel Language, Adjusting the Sound, Timer

3.6 SELECTING THE CHANNEL LANGUAGE

Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the W and

Vkeys.

The language originally set remains selected when you quit the menu using the E key. The selected language is stored when you quit the menu using the OK key.

N.B.: Please note that many channels only offer one language. Many radio stations do, however, offer up to 20 or more «sub»-channels. These channels can be selected in radio mode also by pressing the A key.

3.7 ADJUSTING THE SOUND

a)The volume of the receiver can be adjusted in 20 stages using the C or B keys.

L2 0 The current volume level is indicated in the channel indicator.

b)	Switching the sound c on/off (mute) - when the sound is switched off, the OSD
	displays a message for approx. 2 seconds. The «mute» function is cancelled by
	pressing the volume keys C or B again.

3.8 TIMER

The timer programming menu is accessed by pressing the G key. Up to 8 timer events can be input for TV or radio channels, as required.

N.B.:		Please note that the video recorder must also be set to identical recording times.
N.B.:		Please note that the remote control is not active during timer recording to prevent
		accidental recording of OSD messages. The volume is switched to full level during
	r E c
		recording.
		If the remote control is activated, the channel indicator on the unit displays «r E c»
		to indicate that a timer recording is currently active.
		The timer recording can be interrupted prematurely only via the G key. After
	E n d
		interrupting the recording, the display indicates «End». The unit then reverts to
		normal operation.
		If a timer recording is started from standby mode, the unit reverts to standby mode
		after the recording has finished.

1...8 Select the next free input field using the number keys 1...8 or using the W or V keys.

BC Select consecutively the input fields for {Date} {Start} {Stop} and {Channel} (the input field is highlighted in white).

OK Activate the input for the selected field using the OK key (the input field is highlighted in black).

Input the appropriate event either directly via the number keys 0...9 or by scrolling through the options using the B C keys.

OK Confirm your selection using the OK key and select the next input field.

EAfter inputting {Date} {Start} {Stop} and {Channel}, you can exit the timer menu by pressing E and quit or input further timed events. You can also programme the timer for radio programmes in the Programme section using the R key.

If the data for timer programming are transmitted, they can also be transferred directly to the timer via the menu ‘EPG... preview’ using the G key.

GB

9