EN
Troubleshooting
Problem Tip
No image or wrong • Make sure SCART cables are
image on TV3 | firmly inserted. |
| • Make sure the receiver (A) is |
| connected to TV3. |
| • Make sure both receiver (A) and |
| transmitter are switched on. |
| • Make sure the video source is |
| switched on. |
| • Make sure the correct SCART |
| input on TV3 is selected. |
| • Select the correct video source |
| with +/- on the receiver (A). |
| > In combination with the |
| SLV5400 transmitter. |
| • If the video source gives proper |
| image on TV1: |
| Make sure the video source gives |
| video signal in CVBS mode. See |
| its user manual |
| • Change the wireless channel that |
| is used for communication. See |
| page 6. |
| • The receiver (A) is out of range |
| of the transmitter. The number |
| of walls and ceilings in between |
| the receiver (A) and transmitter |
| restrict the distance. |
|
|
Interference in the | • Slightly change the position of the |
image on TV3 | receiver (A) or the transmitter. |
| • Change the wireless channel that |
| is used for communication. See |
| page 6. |
| • The receiver (A) is out of range |
| of the transmitter. The number |
| of walls and ceilings in between |
| the receiver (A) and transmitter |
| restrict the distance. |
|
|
8