5. Playback
Playing cassettes
You can use this video recorder to play back recorded VHS videocassettes. You can operate the video recorder using the remote control or the buttons on the front of the video recorder. Your video recorder can only record and play standard VHS cassettes.
1.Put a cassette into the cassette slot. The cas-
sette is inserted automatically. ' |
| ' will | ||
| ||||
appear on the display. |
|
| ||
2.Press |
| to view the tape. |
|
|
K B |
|
| ||
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces the best possible playback quality. For old and
Picture/ sound quality is poor
When playing rental videos or older, poorer quality cassettes, it may not be possible to com- pletely filter out picture and sound interference. This is not a fault in your machine. Read the section 'Manual tracking'.
3.To stop the playback, press L C or C/A on the video recorder.
4.To eject the cassette, press C/A when the video recorder stops the playback.
Automatic
Do I need to change the playback speed when playing back LP recordings? During playback, the correct speed will auto- matically be selected. For more information, please read the section 'Selecting the recording speed (SP or LP)' in the chapter 'Manual recording'.
Displaying current tape position
The following information is displayed on the screen: e.g.: 0:02:45 shows the counter in hours, minutes and seconds.
SP/LP: will show the recorded speed of your cassette
How can I set the counter to '0:00:00'? You can set the counter to '0:00:00' with
CLEAR .
When you put a cassette in the video recorder, the counter will automatically reset to '0:00:00'.
The counter does not move
This occurs when there are no recordings on a portion of a tape. This is not a fault in your video recorder.
The screen shows '-0:01:20'
If you rewind a cassette from the tape position '0:00:00', the counter will show for instance,
Searching for a tape position with picture (scanning)
1.While a cassette is playing, press s 0
(reverse) or B 1 (forward) one or more times.
2.Press K B to resume playback.
Still picture
1.During playback, press STILL 2 to stop the tape and display a still picture.
2.Press K B to resume playback. Scanning and still interferes with the picture quality. The sound is switched off. This is not a fault in your video recorder.
You may want to press STILL 2 repeatedly to reduce the noise of the still picture.
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC standard (for example, American cassettes) can be played back using this video recorder.
However, this only works on
9 | EN |
|