Connecting with a scart cable
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a scart cable (3).
1Remove the aerial cable plug from your TV set. Insert it into the socket 2 at the back of the video recorder.
2Insert one end of the supplied aerial cable into the socket TV at the back of the video recorder and the other end into the aerial input socket at the back of the TV set.
3 | Plug one end of a scart cable into the scart socket | EXT.1 | AV. 1 at | |
| the back of the video recorder and the other | end into the suitable | ||
| scart socket on your TV set reserved for | the | video | recorder |
operation (see your TV's operating instructions).
My TV set has several scart sockets. Which one should I use?
Select that scart socket which is suited for the video output as well as for the video input.
My TV offers me a selection menu for the scart socket.
Select 'TV' as a connection source of this scart socket.
4Switch on the TV set.
5Insert one end of the supplied mains cable into the mains socket 4 at the back of the video recorder and the other end into the wall
socket.
6If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, e.g. 'EXT', '0', 'AV', you will see the following picture:
8 | Connecting the video recorder |
|