Search mode

Protecting a video recording

1.Press the pause key for longer than one second during playback to mark the beginning of a protected recording.

>A dialog window appears.

>The time and date of the marker at which protection of the video starts is shown.

2.Press the select key to continue playing the video you wish to protect.

3.During playback, press the pause key for longer than one second again to mark the end of a protected recording.

>A dialog window appears.

>The date and time of the beginning and end markers of the video to be protected is shown.

4.Select Yes to protect the marked video from deletion.

Press the search key to open the search menu. Use the search menu to search for stored video recordings.

Live, playback and search modes

>>SEARCH CRITERIA

•Set the Event filter to search for only alarm events, only motion events or both.

•Set to None so that the search is not restricted by events.

•Fill in a time and date from where to start the search.

•Specify the cameras to search for. The selected cameras are shown at the bottom of the menu with a check mark.

•Press a camera key to change the selection.

•Select Search results to see a list of results.

•Press the escape key to exit the search mode and return to the previous mode.

>>SEARCH RESULTS

•The recording fitting the filter and closest to the start date and time is shown first.

•Use the up/down arrow keys to move through a long list. The selected recording is shown.

•Use the left and right arrow keys to change the direction of play.

•Press the select key for a full-screen playback of the selected recording.

•Press the search key during playback to return to the list.

•Press the escape key to return to the filter menu.

PLAYBACK SEARCH

SEARCH RESULTS

CAMERA 1

MOTION

2002-03-14 15:00:17

English

Philips Communication, Security & Imaging