Philips NP3900/12 user manual Network settings, Setup network, Device name, press To select

1/3

Automatic (Internet)

Manual

Tip

According to the location and time zone you select, the unit can have the clock time set and adjusted automatically through the online service over the Internet.

To check and change current location and time zone, go to [Settings] > [Location and time zone].

Manual setting

1Turn on the unit, if necessary.

2From Home screen, select [Settings] > [Clock settings] >[Date and time].

Or, press SETTINGSon the remote control to enter [Settings].

3In [Date and time], select [Current date and time] > [Manual].

4To enter date and time,

Press or to select the entry location;

Use the alphanumeric buttons to enter desired digits;

Press OK
You can also press	or

repeatedly, or press and hold or until the desired digit appears.

Set date/time format

Select how date and time are displayed in the clock.

1Follow Step 1-2 under “Manual setting”.

2In [Date and time], go to [Time format] or [Date format] to select options.

Network settings

Setup network

how NP3900 connectsto home Wi-Fi/wired network:

Switch between different connection methods (wireless or wired, automatic or manual);

Switch between different routers.

To do so, do the following:

1From Home screen, go to [Settings] > [Network settings] > [Setup network].

Or, press SETTINGS on the remote control to enter [Settings].

2Connect NP3900 as you did in the

>’Connect to home Wi-Fi/wired network’).

Device name

In [Device name], you can name/rename your NP3900. On a connected UPnP server/client, the NP3900 can be found as named.

1From Home screen, go to [Settings] > [Network settings] > [Device name].

2 In [Device name], press	/	to select
the entry location; press	/	repeatedly
to select desired letters.

40EN