Philips BDL4620QL user manual Mounting on a Wall, Ventilation Requirements for enclosure locating

BDL4620QL

1.4.Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit.We recommend using a mounting interface that complies with UL1678 standard in North America.

400

Protective Sheet

400

Table

1.Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face.

2.Ensure you have all accessories for mounting this display.

3.Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4.For the wall-mounting kit, use M6 mounting screws (20 mm long plus the thickness of the mounting bracket) and tighten them securely.

Caution:

To prevent the display from falling:

•To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the bracket manufacturer for installation location.

Ventilation Requirements for enclosure locating

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

	100 mm
100 mm	100 mm
	100 mm

NOTE: When installing the display on a wall, please consult a professional technician for proper installation.We accept no liability for installations not performed by a professional technician.

2