Philips BDL4677XL user manual Monitor ID, Hdmi with One Wire, Smart power, Auto signal detection

BDL4677XL

2.Press [] or [] button to select a schedule item (item number 1 ~ 7), and then press [] button to mark it the item number.

Schedule

Today	2012 . 08 . 04 THU		20 : 19 : 55
1	1	2	3
2	On	Off	Input
3	＿ : ＿	＿ : ＿	＿
4				4
5	Every day	MON	TUE
6	Wed	THU	FRI
7	SAT	SUN	Every week

3.Press [] or [ ] button to select the schedule:

1Power-on schedule: Press [] or [] button to set the hour and minute for the display to turn on.

2Power-off schedule: Press [] or [] button to set the hour and minute for the display to turn off.

Select or leave an empty “__” for both the hour and minute slot if you do not want to use this power-on or power-off schedule.

3Input-source selection: Press [] or [] button to select an input source. If no input source is selected, the input source will remain the same as last selected.

4Date schedule: Press [] button to select which day in a week this schedule item will be take effect, and then press the [SET] button.

4.For additional schedule settings, press [EXIT], then repeat the steps above. A check mark in the box next to the number of the schedule item indicates that the selected schedule is in effect.

NOTES:

•The {Every day} selection in a schedule item takes priority over the other weekly schedules.

•If the schedules overlap, the scheduled power-on time takes priority over scheduled power-off time.

•If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. For example, if schedule items #1 and #2 both set the display to power on at 7:00 AM and off at 5:00 PM, then only schedule item # 1 will take effect.

Monitor ID

Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number when multiple sets of this display are connected. Monitor ID number range is between 1 to 26.

DDC/CI

Choose to turn on or off the DDC/CI communication function. Select {On} for normal use.

DDC/CI (Command Interface) specifies a means for a computer to send commands to the monitor, as well as receive sensor data from the monitor, over the bidirectional link such as DDC2Ab/Bi/B+.

Specific commands to control monitors are defined in a separate Monitor Control Command Set (MCCS) standard.

DDC/CI monitors are sometimes supplied with an external color sensor to allow automatic calibration of the monitor’s color balance. Some tilting DDC/CI monitors support an auto pivot function, where a rotation sensor in the monitor enables the operating system to keep

the display upright as the monitor is moved between its portrait and landscape positions.

The following DDC/CI commands should be supported via command line:

No.	Commands
1	Set Brightness
2	set Contrast
3	Set Red Gain
4	Set Green Gain
5	Set Blue Gain
6	Get Brightness
7	Get Contrast
8	Get Red Gain
9	Get Green Gain
10	Get Blue

HDMI with One Wire

CEC control.

•{Off} - Disable CEC.(Default)

•{On} - Enable CEC.

Smart power

Set the display to reduce the power consumption automatically. The options are: {Off} / {Medium} / {High}.

Auto signal detection

Choose to let the display detect and display available signal sources automatically.

•{Off} - Once a signal is connected, it can only be selected manually.

No signal, set the display to display the image automatically according to the search order of each option.

The options are: {All} / {PC source only} / {Video source only} / {Failover}

•{All} - Search order: DP -> DVI-> VGA -> HDMI -> Component-> Video -> Card OPS

•{PC source only} - Search order: DP -> DVI -> VGA -> HDMI -> Card OPS

•{Video source only} - Search order: HDMI -> Component -> Video

•{Failover}

-- Failover is the function of auto switching to the backup (failover) input in the event a failure or abnormal termination of the primary (main) input device occurs. (PC or media player failure)

-- The failover input, can be directed to any input on the display other than the primary. (Ex, Primary = HDMI, Failover = DVI,VGA)

-- With Failover activated, in the event of a primary input device failure, the display will automatically switch to the Failover input and display the content that is being played on the backup input.

-- When primary (main) input is back on, the failover mode will need to be reset manually in order to perform the failover function again. The failover will automatically switch off after primary (main) input has returned to normal operating status.

-- Main input(selected by user), default is HDMI. Secondary input (selected by user), defaullt is VGA.

NOTE:

•The primary input signal to display priority, and this item is functional for Primary input signal only.

23