B Connect TV2
1.Take the supplied SCART cable (D).
2.Plug one end into the TV2 SCART port on the receiver.
3.Plug the other end into the SCART port of the TV.
C Connect the power adapter
1.Take the supplied power adapter (E).
2.Plug the connector into the DC 12V power connector on the receiver (B).
3.Plug the adapter into the power outlet.
> The power light on the front comes on as red.
D Check the operation of TV2
1.Switch on TV2.
2.Switch on the receiver (B).
3.Select the correct SCART input on TV2.
4.Point the remote control of the video source to the receiver (B).
5.Operate the video source with its remote control.
6.Check if TV2 shows the image of the video source.
> The receiver is connected correctly.
TV2
2
1
TV2 | 3 |
|
DC 12V
2
3
1
AC
TV2
1
2
WIRELESS TV LINK RECEIVER
4 5