Philips BDL4765El Installing and Removing Table Stands optional, To install table stands

BDL4765EL

1.4.Installing and Removing Table Stands (optional)

To install table stands:

1.Ensure your display is powered off.

2.Spread a protective sheet on a flat surface.

3.Grab the carrying handles and place the display face-down on the protective sheet.

4.After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.

Carrying handle

Thumbscrews

Guide block

Longer portions face the front

Table stand

To remove table stands:

1.Power off the display.

2.Spread a protective sheet on a flat surface.

3.Grab the carrying handles and place the display face-down on the protective sheet.

4.Remove screws using a screwdriver and place them in a safe place for reuse.

1.5.Using of remote senser and power status indicator

1.Pull down the lens to have better remote controll performance and easy to observe the light information of power status.

2.Push up the lens before mounting the dispaly for video wall application.

3.Pull/push the lens until hearing the click sound.

Push up to collapse the lens Pull down to extend the lens

2