Philips 20DV6942/37 user manual Digital Setup

28

DIGITAL SETUP

Press SETUP. Press 2 or 3 to

1 choose DIGITAL SETUP. Press CH+o or CH-p to select

2 a feature, then press 3. Press CH+o or CH-p to

3 select a setting. Press ENTER.

- - DIGITAL SETUP	- -
DUAL MONO	STEREO
DYNAMIC	L-MONO
SPDIF OUTPUT	R-MONO
	MIX-MONO

DUAL MONO: Adjust when		SET LEFT MONO MODE
Disc sound is in Stereo (from
left/right channels).
Choose STEREO to separate the				POWER
	OPEN/CLOSE	MUTE	TV/AV/DVD
left/right sounds into the				SLEEP
left/right speakers. Choose L-	1	2	3
				CLOCK
MONO or R-MONO to hear	4	5	6
				S.EFFECT
either the left or right channel at	7	8	9
	DVD10+		DISPLAY	PICTURE/DEL.
both speakers. Choose MIX-	FAV.	0
	TITLE	RECALL	MTS	VOL+
MONO to hear a mixture of the	MENU/PBC	SETUP	MENU	VOL-	1,4
left and right channels at each	1-3
speaker.		CH+

DYNAMIC: If your Disc has Dolby Digital sound, use DYNAM- IC to minimize volume extremes. Adjust the gap between soft and loud sounds by choosing a ratio between 1/8 and FULL, or choose OFF.

SPDIF OUTPUT (Sony-Philips Digital Interface): Choose SPDIF OFF if the TV/DVD is connected to a Stereo using the red/white AUDIO OUTPUT jacks. Choose SPDIF RAW if it’s con- nected to an audio system using the DVD DIGITAL OUTPUT COAXIAL jack.

Discs are recorded in a certain sampling rate.The higher the rate, the better the sound quality. Choose PCM/96K if you play Discs recorded at the high rate of

96kHz. Otherwise, choose PCM/48K.

Press SETUP to remove the

4 menu.

ENTER

CH-

	SCAN		SKIP
	SLOW	R/L	SEARCH
			MODE
LANGUAGE	ANGLE	SUBTITLE	ZOOM
REPEAT	REPEAT	STOP	PLAY/PAUSE
	A-B

/