Philips 14PV460/07, 14PV203/07, 14PV415/07, 14PV111/07 Decoder allocation, Manual TV channel search

Decoder allocation Manual TV channel search

Some TV channels transmit encoded TV signals which can only be viewed with a commercially purchased or rented decoder without distur- bances. You can connect such a decoder to this TV-Video Combi. The following function will auto- matically activate the connected decoder for the desired TV channel.

1.Use			,				or			to select the TV chan-
	P+			P-					0..9
nel which you would like to allocate the
decoder to.
2.Press						. The main menu will appear.
		MENU
3.Use							to select 'TUNER SET UP'.
	K B			L C
Then press								.
					B 1
4.Use							to select 'MANUAL TUNING'.
	K B			L C
Then press								.
					B 1
5.Use							to select 'DECODER'.
	K B			L C

MANUAL TUNING

PROG. P55

CHANNEL 055

→DECODER [OFF]

SKIP[OFF]

SELECT K L CHOOSE B

END=EXIT

6.Use B 1 to select 'ON'

(Decoder switched on).

How can I switch off the decoder?

Use B 1 to select 'OFF' (Decoder switched off).

7.To end, press STATUS/EXIT .

The decoder has now been allocated to this TV channel.

EN

In some cases it could occur that all of the TV channels were not found and saved during the Preparation for use. In this case, the missing or coded TV channels must be searched for and stored manually.

1.Press MENU . The main menu will appear.

2.Select 'TUNER SET UP' with

K B

L C

and

confirm with

.

B 1

3.Select 'MANUAL TUNING' with

K B

L C

and confirm with

.

B 1

Select 'PROG.' with

K B

L C

4.

.

. Then press

B 1

MANUAL TUNING

→PROG.

P55

CHANNEL

055

DECODER

[OFF]

SKIP

[OFF]

SELECT K L CHOOSE B

END=EXIT

5.With K B L C or 0..9 , select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press B 1 .

What is a special channel?

TV channels are transmitted in certain pre-defined frequency ranges. These ranges are divided into channels.

A specific frequency/channel is assigned to each TV station.

Certain frequency ranges are specified as special channels (hyperband channels).

6.Select 'CHANNEL' with K B L C , and con-

firm with B 1 . Then enter the desired chan- nel with 0..9 .

When a channel is found,it will stop searching. If

this is the channel you want, press B 1 . If you set 'SKIP' on for a channel, this channel will be ignored when going through the channels with

P+ or P– .

To search for other TV channels, begin again at step 4.

I don't know the channels for my TV stations In

this case, press K B L C in 'CHANNEL' to start the automatic channel search. A changing channel number will appear on the TV screen. Continue the automatic search until you have found the desired TV channel.

7.To end, press STATUS/EXIT .

6